Models > KECC056RBL02

KECC056RBL02 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KECC056RBL02

If you know the cooktop repair part you need, you can browse the list of all parts on the KECC056RBL02, or you can search by name or part description. You can also find your part by where it is located on the KECC056RBL02 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your cooktop. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the KECC056RBL02 [Viewing 1 of 1]

$3.83

SCREW

$15.74

Surface Burner Knob

Sold individually.

$4.36

Burner Knob

Sold individually. This bisque knob accepts a double-flat shaft.

$74.00

Surface Element - 1200W

$89.84

Surface Burner Element - 1800W

$16.68

Burner Knob

Sold individually. This knob accepts a double-flat shaft.

$331.13

Main Cooktop - Black - 2 Burner

$40.49

6" Surface Element Infinite Switch

$3.83

SCREW

$4.60

SEAL-SWTCH

Common Symptoms of the KECC056RBL02 [Viewing 1 of 187]

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Hot Burner Light always on

  • Customer: Gregory from Cary NC
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 39 of 57 people found this instruction helpful
Thermal switch is integral to element and can not be changed, must replace entire element.

Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and th... read more

No heat on burner

  • Customer: paul from trumbull CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers, Socket set
  • 15 of 21 people found this instruction helpful
Turned off electricity! Pulled stove out -lifted up glass top(carefully) simply removed burned out coil and replaced it with new one. read more

Defective Surface Burner Element - 1800W

  • Customer: Robert from Daytona Beach FL
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 12 of 19 people found this instruction helpful
First discount Ac from wall, then take out 2 screws on the front of the range top and lift up the top of the range surface, then while holding up the surface top take out the front burner and replaced new burner element.Let the surface top down and screw in the two screws. the surface top of the range is hinged so it would be good to have someone to hold th... read more