Quick Question!

Have you ever purchased from PartSelect.com before?

292310-1-S-GE-WR17X1363         -Rear Moving Dispenser Blade
292310-1-S-GE-WR17X1363         -Rear Moving Dispenser Blade http://www.partselect.com/Schematics/GE/00113448i03.gif

Rear Moving Dispenser Blade

PartSelect Number PS292310

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$6.86

You Save

$1.14

Your Price

$5.72
Order within the next 10 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Front Moving Dispenser Blade

Part Number 292308

$6.59
On Order

Blade - Middle

Part Number 292309

Also called Moving Dispenser Blade.

$9.21
On Order

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 3 reviews What's this?
1-3 of 3
 

21 of 37 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Wrench set
Customer: Allan from Pleasanton, CA

Meatal parts were rusted

the part is fairly easy to take apart, however pay close attention to how things fit and go together. It took me sometime to figure the reassembly out due to my lack of close attention to taking it apart. other than that it is simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Kelly from Canandaigua, NY

Ice maker would not crush ice.

Removed tray from ref. Removed from cover from tray useing a screwdriver. Removed housing, took old parts out. Make sure you take the parts out in order and put new parts back in same order as old parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Leonard from Hawthorne, CA

Replace dispencer blade

Removed the exterior 4 screws and 1 holding the metal rod underneath. Sepearated the plastic parts pulled out the dispensing mechanisim. Removed the lock washer, then removed the spacers and blades. Put the new blades in with the spacers and reversed the other steps and done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3