Quick Question!

Have you ever purchased from PartSelect.com before?

292441-1-S-GE-WR17X2062         -Ice Dispenser Plate
292441-1-S-GE-WR17X2062         -Ice Dispenser Plate 292441-2-S-GE-WR17X2062         -Ice Dispenser Plate 292441-3-S-GE-WR17X2062         -Ice Dispenser Plate http://www.partselect.com/Schematics/GE/00113448i03.gif

Ice Dispenser Plate

PartSelect Number PS292441

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$35.59

You Save

$5.93

Your Price

$29.66
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.0 / 5.0, 6 reviews What's this?
1-6 of 6
 

21 of 37 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Wrench set
Customer: Allan from Pleasanton, CA

Meatal parts were rusted

the part is fairly easy to take apart, however pay close attention to how things fit and go together. It took me sometime to figure the reassembly out due to my lack of close attention to taking it apart. other than that it is simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 5 people found this instruction helpful

Parts Used:
  • Ice Dispenser Plate
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: kenneth from west chicago, IL

Ice-maker grinding faceplate heavily rusted causing rusty ice

Disassembled ice-maker, noting what screws went where, what direction ice release control arm pointed, and noting how the control arm spring was mounted. The door assembly comes off first followed by the circular assembly that houses the ice door and last grinding arms. It is quite easy see how it comes apart as you look at the screws. Remove the screw holding the back end of the control arm and note the spring position. The control arm needs to be turned to line up notches to pull it thru a faceplate hole while rotating the arm about the "U" that is on the outside of the faceplate in the door housing. There is a retaining clip holding the rotating impeller to remove to complete the dis-assembly. Use vinegar to clean rust out of bin and other parts around the faceplate. Assemble the unit in the reverse order to complete the job.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Ice Dispenser Plate
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Ali from Blue Island, IL

The ice dispencer's face plate was stainy and dirty ofcourse after a long time,it would be cleaned but for new look I reffered to change it.

I had no idea how to get the parts easily so i search on web , saw parts select.com,i read main folio of the site.which seems to me very reasonable.just one call and they delivered the part.nicely advised me if i need technical support to fix it but i was too confident and i did it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Ice Dispenser Plate
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Wrench (Adjustable)
Customer: Roberto from Wildomar, CA

Rusty plate in the ice dispenser.

removed the dispenser and disasembled it repaced plate and reasembled.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Difficult
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers
Customer: Edward from Morris Plains, NJ

Ice came out with rust spots all over it

Replacing the plate requires taking apart the entire ice dispenser! It looks very difficult, but really is not very tough. The one good thing about it is that once it is all taken apart it is very easy to wash off the rust from the other parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Jorge from Aventura, FL

Rusty and broken plastic parts

It was just a matter of replacing the broken parts, and reassembling the ice machine. Nothing too difficult.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-6 of 6