Part Location Diagram of WB06X10144 GE Glass Turntable Coupler
See part 37 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Glass Turntable Coupler WB06X10144

 Fits your JVM1851WH01!
★★★★★
★★★★★
16 Reviews

Rated by 17 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 19.38
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your JVM1851WH01!
PartSelect Number PS227859
Manufacturer Part Number WB06X10144
Manufactured by GE
Product Description

Glass Turntable Coupler Specifications

This part accepts a D-shaped motor shaft.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Tray won’t turn
This part works with the following products:
Microwave.
This part works with the following products:
General Electric, Hotpoint.
Part# WB06X10144 replaces these:
AP2016754, 769278, WB6X10144
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
16 Reviews
4.9
Filter By Rating:
  • 5 Stars
    14
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
Customer Repair Stories
 Average Repair Rating: 4.6 / 5.0, 17 reviews. What's this?
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing installation instruction that matched.
The center of turn table broke. A small plastic part that goes under the glass in center.
We took out the broken part, it came right out,and put new part .
  • Kathy from LEWISTON, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
part was cracked
removed old part and replaced
  • BRUCE from MONROE TWP, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable wouldn’t turn
I removed a few (6) screws and disengaged the motor. Removed the parts and installed in reverse order. Replaced the screws. Easy

Cleaning up the grease from cooking for years on the stovetop below took WAY longer. But the repair was simple!!
Other Parts Used:
Drive Motor Glass Turntable Coupler
  • Kim from Richland, WA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable Replacement Motor was a larger diameter than the original
Drilled a new tap hole in the base-plate to match the larger diameter motor.
Other Parts Used:
Turntable Motor Glass Turntable Coupler
  • Edward from DENVER, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Previous coupler was cracked/broken
I ordered and replaced the coupler. Once installed, all was well!
  • James from POWAY, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The coupler broke , glass turntable not turning
Received part installed in less than one minute, easy fix alignment of part in shaft pressing down into position
  • Timothy from LAKE WALES, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Glass turntable stoped turning due to broken coupler
Pulled out broken one with fingers, put on new one with fingers, it did not have anything preventing it from just slipping on. Didn't need to take anything apart to install me part.
  • Barbara from Fruit Heights, UT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
10 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable quit turning.
Disconnected power cord from receptacle. Removed 5 screws in bottom panel and allowed it to swing downward on rear hinged edge. Disconnnected power wires to motor. Removed screw to detach motor. Inserted coupler through hole beneath center of turntable. Inserted motor shaft into coupler and re-attached motor. Connected power wires to motor and then closed the bottom panel and re-inserted the 5 screws.
  • JACK from ETOWAH, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable coupler broke
I took the part out of the box and handed it to my wife and said "here ya go hun, go put this under the glass turntable in the microwave. You'll know it's installed when you hear it click down" She yelled back, "easy as pie" - - - Humm.. I can't make a pie. Fortunately the old one was in one piece as the side just split so it slid off very easy. The new one just snapped in place.
  • Thomas from Savannah, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable coupler bore became oversized.
Small sized phillips screw driver was required. Once gaining access to the new motor the part(s) replacement was simple.
Other Parts Used:
Drive Motor Glass Turntable Coupler
  • Walter from Herndon, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bernard
January 4, 2023
Ordered the wrong GE Microwave model (1853SJ02) turntable coupler. How can I return and reorder correct piece
PartSelect logo
Hello Bernard, thank you for your question! The compatible coupler for your model is part number PS227859. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Martin
September 5, 2019
Will not turn
For model number jvm1840wd001
PartSelect logo
Hello Martin, Thank you for the question. If there is no damage to the Glass Turntable Coupler, PartSelect Number PS227859 I suggest replacing the Drive Motor, PartSelect Number PS237772. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS227859
Manufacturer Part Number: WB06X10144
Brand
Model Number
Description
General Electric
DVM1850DM2BB
Microwave
General Electric
DVM1850DM2WW
Microwave
General Electric
DVM1850DM3BB
Microwave
General Electric
DVM1850DM3WW
Microwave
General Electric
DVM1850DM4BB
Microwave
General Electric
DVM1850DM4WW
Microwave
General Electric
DVM1850DMBB01
Microwave - Counter Top
General Electric
DVM1850DMWW01
Microwave - Counter Top
General Electric
DVM1850MM2BG
Microwave
General Electric
DVM1850MM3BG
Microwave
General Electric
DVM1850MM4BG
Microwave
General Electric
DVM1850MMBG01
Microwave - Counter Top
General Electric
DVM1850SM2SS
Microwave
General Electric
DVM1850SM3SS
Microwave
General Electric
DVM1850SM4SS
Microwave
General Electric
DVM1850SMSS01
Microwave - Counter Top
General Electric
EMO4000JBB01
Microwave - Counter Top
General Electric
EMO4000JBB02
Microwave - Counter Top
General Electric
EMO4000JBB03
Microwave - Counter Top
General Electric
EMO4000JBB04
Microwave - Counter Top
General Electric
EMO4000JBB05
Microwave - Counter Top
General Electric
EMO4000JCC01
Microwave - Counter Top
General Electric
EMO4000JCC02
Microwave - Counter Top
General Electric
EMO4000JCC03
Microwave - Counter Top
General Electric
EMO4000JCC04
Microwave - Counter Top
General Electric
EMO4000JCC05
Microwave - Counter Top
General Electric
EMO4000JSS01
Microwave - Counter Top
General Electric
EMO4000JSS02
Microwave - Counter Top
General Electric
EMO4000JSS03
Microwave - Counter Top
General Electric
EMO4000JSS04
Microwave - Counter Top
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service