Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS1482197
This dryer knob accepts a D-shaped shaft.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Removed the 3 knobs. They just pull off. Removed 6 screws on the back side of the control panel. The front (plastic panel then just separates from the back). Then look at how the switch is mounted on the plastic panel. There should be 2 small pieces of plastic that holds it in. Carefully twist the switch in the appropriate direction so it comes free. Before you remove any wires from the old switch remember what colors go where ! I used needle nose pliers to remove the connections from the switch. Make the new connections, mount the switch, put the screws back in the panel. BEFORE YOU DO ANYTHING. UNPLUG THE ELECTRICAL CORD !!!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Pulled off old knob and aligned new knob and pushed on. Videos sent with order was very clear and great customer service tool.
It was so incredibly simple! The site made it foolproof to find the right parts - and the actual replacement job itself was easier than we ever could have imagined. Background: I love to do laundry - I mean A LOT! So - I use the washer and dryer every night to wash the familie's clothing and blankets and towels. After heavy use - the outer knob stripped out. We threw it away and were using pliers to turn the small plastic knob underneath. After a few months - that plastic wore down and we could not turn it on at all!
Very easy. I just snapped the new timer knob on and I was ready to go.
removed back panel, exchanged wires on old timer to new. Do this one at a time as there is no color chart to follow. Timer clips back in. Used a little screw to lock it in. Not sure if this was on the original but there was a place for it. Re-attached back panel and placed knob on shaft. Overall saved a bundle as a service visit is $175.
Timer knob broke (again) so we just used pair of pliers to set time for drying. This caused timer's plastic knob shaft to broke very quickly, so whole timer had to be replaced. I didn't have ANY experience with this but it was very simple. I disconnected power cable from the outlet. Using screwdriver removed back panel, then using pliers disconnected all wires from the old timer and connected them back to the new one. And that's it, dryer working like new.
I took apart the top of the dryer and removed the switch and replaced it with the new one. I also removed the knobs and replaced them. Easy
Replaced timer switch, stem was stripped. Also found all 4 knobs cracked, which surprised me. . Unit only 2 years old, replaced them also. All repair done from top, removed top then control panel, popped knobs off, replced them. Working good now.
I pulled the dryer three feet from the wall. UN-PLUGGED THE UNIT!! Removed 3 screws from the very top of the dryer,and pulled 1 wire at a time from the old switch and put it on the new one. Super easy.
Ordered part from the make and model number on the inside of dryer. Unplugged and Took screws off the back panel. Unplugged all color of wires while remembering where they went. Put in new motor and put wire plugs back in place, then screwed back plate cover back in place. NOTE: It's like changing a fuse in your car. It was really easy!
Replaced failde timer with parts. parts arrived quickly
Simply removed the cracked timer knob and replaced with the new one. The replacement time was received in less than 24 hours after I made the order! Outstanding customer service!
The person on the phone was so helpful in locating the exact timer needed. We received the prt 3 days later and it was so easy to install. I would highly recommend this company. A local shop wanted to charge 3x more then what we paid.
I went on line to Parts select to price the part and found it had directions to fix it also.I purchased the new timer for my dryer and since I had originally broke the knob I purchased that as well..for under $100. I received the part,took that dryer apart, replaced the broken parts and now have a working dryer. I can feel very proud of myself that I did not have the added expenses of a repair man to go with it. Thanks for your help. Barbara R.
The inner piece of the knob cracked so it just spun on the dryer shaft it's suppose to turn. Ordered a new knob, slipped it on and all works great again now.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.