All Installation Instructions for Westinghouse Refrigerator WRS26MF5AS2

door bins broke

great less than 5 minutes

Parts Used:

Refrigerator Door Bin

Michael from Massapequa, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Overdue replacement

Everything went according to plans and as expected. It could not have gone any easier. Customer service was outstanding! I will certainly use your service again.

Parts Used:

Refrigerator Water Filter

Carl from Melbourne, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

The drive blade was worn and wouldn't turn the drum

First off make sure you have a good quality Phillips screw driver. When the blade is worn out you can disassemble the ice maker with out removing the front. But to reassemble the front cover must be removed. Do yourself a favor and buy the drum and nut also. I am a mechanic by trade so the tools and repair was really easy. Be careful of the ice crusher BLADES they are very sharp. If your not mechanically inclined take pictures before disassembly, that will help you greatly. Hope this helps someone. Thanks Rory

Parts Used:

Ice Dispenser Drum

Auger Nut

DRIVE BLADE

RORY from OAK HARBOR, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Water leaking from dispenser

Used a nut driver to remove the small panal from the back of the refrigerator. Removed the two screws holding the valve in place. Unscrewed the water lines from the old valve and cut the ends off of them. Push the water lines back into the new valve. Unpluged the wiring from the old valve and installed them in the new valve. reinstalled the new valve and put the cover back on. Tested system for proper operation.

Parts Used:

Refrigerator Water Inlet Valve

Gary from San Angelo, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

broken frig door bins

Pushed the bins in place,very easy.

Parts Used:

Door Shelf

john from Miami Gardens, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Door would not shut itself.

I looked up the model number here& found the parts list. They were very detailed, making identification of the proper part easy. I then watched the repair video which showed just how easy this repair was to complete. Once the part arrived, I removed the hinge cover screw, removed the two hinge bolts and lifted the door off the bottom hinge. It took the most amount of time to remove the broken hinge bearing. The new one popped right into place. I reversed the process and was quickly finished.

Parts Used:

Hinge Bearing

Russell from Shinglehouse, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

broken bin door

just snapped part unto door.

Parts Used:

Door Shelf

Francis from Lancaster, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

broken door shelf

Ordered and received new shelf. Replacement took about one minute.

Parts Used:

Refrigerator Door Bin

David H from Scottsdale, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Shelf cracked

Had them in a couple of days. Very impressive. I've recommended this site to many friends.

Parts Used:

Refrigerator Door Bin

Toni from Flint, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Had a cracked door hinge

Watched the Parts Select video associated with this part. Very easy repair. Removed the right-hand door, removed the broken hinge, popped in the new part, applied some lubrication and put the door back on. Lengthiest part was removing food items from the door in preparation for the job. Highly recommend watching the video first as it shows you exactly what to do and how easy this job is.

Parts Used:

Hinge Bearing

Eric from Lowell, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

The upper Crisper Drawer Cover cracked apart making it difficult to keep crisper closed and weight of items on shelf applied too much pressure on cover. The cantilever design of shelf once frame of cover was cracked was placing too much load in the wrong places making the shelf virtually unusable.

The repair literally to 5 minutes. Remove one shelf, slide new one in. Simple repair.

Parts Used:

Upper Crisper Drawer Cover - Glass NOT Included

Erica from Dunkirk, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Two broken door shelves

Wiped down the new shelves; popped them in place; done in about 1 minute each. Delivery was as expected; watched progress of packages on the Fed Ex site. Delivered as promised.

Parts Used:

Refrigerator Door Bin