WRS26MF5AS2 Westinghouse Refrigerator - Instructions

Removed old water pump and cut off ends of all lines. Plugged them into each water inlet/outlet and turned it on. Instant water to dispenser but took about 6 hours for ice maker to get water. Had to prime the ice maker. Works great and saved a lot of money ordering parts from you. Thanks.

got the new one replased it and it was easy plus im certified in majjor apliences

just put it in the old hole. the hard part was getting the old one out. you have to poke the center piece in to remove. otherwise you will break your fridge. then you have to to pull the center piece out before you put new in.

just follow the instructions.

husband did it took only a few min part was easy to find

Easy to assemble after cutting original water line fittings off. Use sharp knife to keep from damaging end of water lines.

take of the tray & take parts out & installed the new ones

took off the broken part and replaced with your new,it look like i never broke the handle at all.

Removed the nuts on top - to loosen the door. Lifted the door off the hinge. Took out old part, put in new one, reinserted door, replaced nuts.

Popped the old water filter out and popped the new one in, just as easy as that!!

I originally ordered the wrong part (for the freezer side). Received the part on Saturday--I had ordered on Thursday afternoon. Discovered my error and got on line to see how to return and ordered the correct part. This part came on Tuesday morning. I put the part on the door and was finished in no time! Great service and easy return for my wrong order. Thanks.

Pulled the old filter out and pushed the new filter in.

Snap off and snap on! Totally amazed, purchased on line at 8pm and they came the "next" day around 1 pm and shipping was only 7 bucks part select is awesome!!!

The two screws that held the ice maker in place could not be seen do to there location. I could only get one hand inside do to space restriction.So I placed a mirror inside so I could see the screw heads and from point it was very easy to see and line up the nut driver on the screw heads. I then lifted it up and unplugged the wiring and installed the new ice maker. Works like a charm. Paul

1st a changed the defrost stat. Waist of time. Realized there was no evaporator above fan. Noticed ice was builing up behind ice maker near fill tube. Found if I shut off ice maker ice wasnt building up on fan. Moved fridge out unplugged fridge unscrewed plastic nut. Turned 90 degrees. Replaced tube locked in place . Screwed nut back on . Plugged in and turned ice maker on. Wife happy ice was back on and no noise.