WRS23MF5AS5 Westinghouse Refrigerator - Instructions

I watched the step-by-step installation video and followed the instructions therein.

I replaced the condenser fan motor, but first I bought a brush to clean the coils. I first unplugged the fridge and took off the back panel. I located the fan motor and noticed how dusty it was back there. All the dust dirt and pet hair can accumulate making the motor work harder and overheat. I cleaned the coils with the coil brush and a shop vac. Once I cleaned it, I started to take off the three screws that held the fan motor suspended,its important that you move the fridge enough so you have adequate room to work. I unplugged the motor and finished removing the screws. When I removed the motor I was upset when I compared it to the motor I was sent because it looked physically different. The motor I removed had a plug that was integrated in the motor, but the one I received had a plug that pigtailed outside the motor. I called PartSelect and told them they sent me the wrong motor. The lady that I spoke with was very friendly and helpful, and after looking up my part # she assured me that it was the right part. Next I had to remove the fan from my old motor, the nut that held the fan on looked like a clip, but it screwed off using open pliers.I removed the fan and put it on the other motor, using the parts supplied. Before I installed the motor I screwed the three screws in and out of the three screws holes to make the screws go in easier during instalation. I installed the fan motor using the three screws supplied, and once it was secure I spun the fan with my finger, making sure the fan spun freely and installed the plug to the fan. I then plugged in the fridge to make sure the fan was working,and replaced the back panel. Hope this helps you out, good luck.

quick to repair great instuctions

Removed the drawer rails from the shelf, installed the new ones. Viola!

Followed video instruction provided on this site.

1st my 72 year old husband has not had great success in repairing anything: electrical or plumbing. We got the part the next day. Had ordered it late one afternoon and had it the next morning in Wyoming. From the time we took it out of the box, disconnected the old one, plugged in the new one, remounted, it took less than 15 minutes. Amazing and it works great. Didn't need extra electrical connector, but tricky part on electrical connectors is to squeeze side to take apart and put back together. He used mirror to see the screws to loosen to take out and put back in ice maker. Next day our tray was full of ice. Good service/Good Product.

Easily found the parts we needed from the diagrams, Hinge bearing and door closing cam, watched the video, which was very helpful, ordered the parts from the parts list numbers...Our order came in just a few days and my husband put the parts on in about 20mins. Couldn't have done it without the help we found on your page...Thank you so much....Will be back if we have any other trouble.... Bill and Ellen Lopitz.....

A friend of our family gave us a nice refrigerator; 2 doors, has ice maker. some parts were missing but through the Parts Select I've been able to purchase online any part needed. Very easy to install and I didn't have any problems with the parts delivered. Fast service and I always get the right part without any delays of returning them. I strongly recommend Parts Select for any person who need to purchase refrigerators parts online.

At first I thought I ordered the wrong cover for my refrigerator but when I removed the electronic from the old one I realized it was the right one. I had to remove the facing from the old one and reapply it to the new one. After that the rest was easy.

removed meat drawer ,,,titled on it;s side , used philip screw drivingto lossen screw ,,removed worn rail and replaced it with new one in less then a minute,,, very easy and cool ,,,

Received the parts promptly and did the repair just as the video showed. All went well and had the repair completed in 10 minutes. For me that was remarkable because I have two left hands! Would highly recommend partselect.com

Called repair person, 80.00 to come look at it. Deceided to see if I could find part on my own. Surfed the net found this website, ordered the part for 5.00, total 13.00 including shipping. waited a few days, received part in mail, lifted refrigerator door off hinge, inserted the part. Works like new. 80.00 plus repair, cost me 13.00. Amazing

Everything went according to plans and as expected. It could not have gone any easier. Customer service was outstanding! I will certainly use your service again.

First off make sure you have a good quality Phillips screw driver. When the blade is worn out you can disassemble the ice maker with out removing the front. But to reassemble the front cover must be removed. Do yourself a favor and buy the drum and nut also. I am a mechanic by trade so the tools and repair was really easy. Be careful of the ice crusher BLADES they are very sharp. If your not mechanically inclined take pictures before disassembly, that will help you greatly. Hope this helps someone. Thanks Rory

Used a nut driver to remove the small panal from the back of the refrigerator. Removed the two screws holding the valve in place. Unscrewed the water lines from the old valve and cut the ends off of them. Push the water lines back into the new valve. Unpluged the wiring from the old valve and installed them in the new valve. reinstalled the new valve and put the cover back on. Tested system for proper operation.