WRS23MF5AS5 Westinghouse Refrigerator - Instructions

The changing of the water valve was pretty straight forward. First shut the water off to the ice maker, then pull the refrigerator out. Once that is done, then I removed the cardboard covering with a cordless drill, loosened the screws that held the water valve in place. The water valve assembly is colored coordinated so disconnecting and reconnecting the lines to the new valve assembly was pretty easy. Reattached the cardboard covering pushed refrigerator back and place turn on supply line and waited for the ice maker to fill up. After several cycles on the ice maker I made one slight adjustment on the ice cube size behind the cover of the ice maker. Total time one hour, then waiting for the ice maker to cycle a few times to ensure all was working properly.

Just took old knob out put new knob in real easy thank you jd

Took front off and found the broken spring, got new one and replaced, now works great. Make sure to unplug as the water can come on and flood the freezer.

I followed the video instructions from your site and it couldn't have been easier.

After receiving the parts, I clamped on the connector ends, and put on the shrink tubes. Unplug frig, took out the shelves (4) screws, unscrewed back panel (4) screws. Took old thermostat off tube, clipped (2)wires on old thermostat, splice wires, clamped connector on old wires, moved up shrink tubes, and used a heat gun to shrink the wires. Put new thermostat on the tube the old one came off of, put panel, and the shelves back. Pugged frig in. Works great!

It was so easy the light socket came right out took out old undid clips (light was melted to socket)put new socket piece in reattached clips...light works...as far as the door not closing...unscrewed on screw took off plastic clip put it in and put the hinge bearing on top...put refrigerator door back on...first top then squeeze bottom on...I bet I saved over $150.00 dollars if I called a repair man for a 15 minute job...your website made the job alot easier discribing what the problem was and parts need...easy to follow....thank you

All instructions included on this site are good. I would add only one thing to them. When removing the 4 water lines from the old unit be sure to pull up on the white rings while you pull down on the water lines. All else is a snap.

I removed the top hinge cover, loosened the hinge so I could remove the door and laid the door on it's side. I removed what was left of the Door Closing Bearing and istalled the new parts. Set the bottom of the door on the lower hinge then postioned and set the top hinge into place and tightened the top hinge and installed the hinge cap.

removed cover from top hinge,then hinge r&r bottom cam plate reinstalled door. now no noise opening door,ice naker is very simple turned water off to frig loosened two screws and unpluged wiring.harness is a little long. took a while to make ice next morning it was working fine

i was trying to figure it out but eventually it fix it self even when i get the part the problem seems to be fix on its own i unpplug the eletrical cord from the wall for over three hours and plugged back in and after 2 more hours it works so i am confussed dont know what happen i did not change any part so i have one brand new inlet water

It was simple... After paying $280 for a repair man to come out and install some unnecessary part to the fridge when I told him "everything on the Internet points to a thermostat repair." He disagreed, fixed the fridge and said the freezer would work more efficiently now. It didn't, so I bought a new fridge/freezer, put the old one in the basement. I ordered the thermostat (under $20), put it in, and now (knock on wood), works great and I have a beer fridge for the man cave

Ordered the part online and it came the next day. No problem putting in the new bin; it took less than a minute and no tools required.

Easily installed the new ice-maker. Rec'd the part in three days.

Just removed the glass and popped the plastic piece out. The new part fit perfectly. This part came overnight...awesome service, exactly right part, easy to find. Would definitely use them again.

The replacement was simple, only two screws and the electrical plug. The problem was the location of the two screws that were impossible to see directly and difficult to access with a screw driver.