Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS430206
Sold individually. Sometimes referred to as the 2-liter bin.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
it was a no brainer install
Help other customers find the most helpful instructions.
Were these instructions helpful?
After I figured out what size nut driver to use, just unscrewed the old housing and screwed new housing back in . Put filter in housing, put top back on and cover back on. We now have water at the dispenser. All is well.
Slid the shelf in place!
It was very easy to insert the new shelf door into the refrigerator slots.
New part fit nicely in an instant. Only issue is that it is a white replacement part and ours was clear...not a big deal because this is the bottom drawer so you really don't even notice.
Easy...just popped the new bin in place, all within 5 minutes.
The longest and hardest part or replacing the icemaker was finding my nut driver. Once I found it, it was 3 nuts to remove and the plug to un-snap. The 4-pin plug was the same as the original so no big deal. Be careful because there was a hot part on the icemaker and I burned my finger when taking it out.
slid in new one!
Put on new shelf in seconds. What a wonderful way to be able to purchase the perfect part easily through the internet. I ordered the part on Sunday and received it on Tuesday. THANK YOU Parts Select!!! K.F.
First I would like to thank partselect for the quickness of delivery. Installation was very simple (a no brainer). Take the shelf bin out of box and slide into the slot on the refrigerator door.
Slid the new door shelf boon into place and closed the door.
once I finally received the proper bin (3 times the charm!), it was easy as pie to pull out the broken bin and replace with the new. The issue was more that our refrigerator is very new so when I tried to shop by model it didn't work and the part number listed on the actual bin was not recognized. I was able to find the same bin via measuring and counting the inches on the online picture, but that was deceiving as well and took 2 different orders to get the proper bin.
I basically took the two shelves and in stalled them.
Replacement took about 10 seconds, just put it onto the holding brackets, pressed down and presto...DONE!
I just simply inserted the bin
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.