Models > PHS69EHSS3 > Instructions

PHS69EHSS3 Frigidaire Refrigerator - Instructions

All Instructions for the PHS69EHSS3
526 - 540 of 729
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
This plastic bottom door bin had cracked and was broken, unusable
Simple install, fits in a groove.
Parts Used:
Bottom Door Bin
  • Patricia from Greenville, SC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
the brackets on the crisper tray broke
after watching the video I followed to the tee used the screw driver tapped out the old peg and removed the stem in minutes I was tapping in the new parts
Parts Used:
Crisper Cover Support - Front Crisper Support - Rear
  • John from Lockport, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Routine replacement of water filter
Push the button on the right side of the ice maker filter compartment which releases the old filter. Just pull old filter out and slide the new filter all the way in. Be sure and mark on the new filter the date that will be time to change the filter again. I ordered the filter on one day and received the filter in the mail the next day and I had not paid extra for overnight shipping.
Parts Used:
Refrigerator Water Filter
  • William from Ooltewah, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Clinking sound and you can feel it in the handle of the door.
The repair was easy. After looking at the diagram and locating the part need i just ordered it. But I wish I had taken the door off before ordering as I really need a second part. So resulting in extra shipping cost. Parts that were needed were 240328201 and 240457702. Tks Jim
Parts Used:
Door Closing Cam
  • Jim from Verona, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
needed a new water filter
I pushed the button to eject the old cartridge - it came out - I pushed the new one in until it locked in place - I reset the filter light on the front. This took less than 1 minute.
Parts Used:
Refrigerator Water Filter
  • Laura from La Porte, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Motor did not work on ice maker
Cost of motor was 70% of complete ice maker. So I changed complete ice maker. Remove food from freezer. Remove ice drawer. Two screws and a four prong plug to change out complete ice maker. Use adjusting screw to assure water completely fills tray but doesn't spill, Suggest you set for less water an one a little each ice cycle until a full cube.
Parts Used:
Rear-Mount Ice Maker Assembly
  • harry from bradenton, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Icemaker quit making ice, clicking noise coming from lower rear of appliance
If this happens to you the first thing I would do is shut off the freezer and, using a hair dryer, melt the ice in the ice maker and heat up the water inlet to make sure it is not froze up. Turn the freezer back on and wait to see if that cures the problem. If not, order the new water inlet valve and follow the simple instructions in the video provided on the PartSelect website. I have never have a more pleasant experience with any parts/repair service than I did with PartSelect. After ordering that part it came within the time they stated and their help with the install was great. Also helpful were the other customers talking about their problems and solutions.Thanks to PartSelect I now have Ice and a happy wife. Happy wife--happy life.
Parts Used:
Refrigerator Water Inlet Valve
  • Paul from Cincinnati, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Quite making ice
The new inlet valve came with pisco connectors so had to cut the end of the tubes off. Before doing this I marked all the tubes to make sure they were replaced in the correct order. The pisco connectors are great to use and very quick. The total install time was about 20 to 30 minutes. While you have the back of the frig off make sure you vaccuum the fan and coils. It was making ice in less than 20 minutes.
Parts Used:
Refrigerator Water Inlet Valve
  • Charles C. from Denver, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
not cold enough
per the video..easy installation....unfortunately the temperature did not improve. We still have a refrigerator temp in the upper freezer.....and a "cooler" in the refrigerator section
Parts Used:
Run Capacitor
  • Gary from Hudson, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken rail on meat draw
One screw taken off, part pops out, pop in new part, replace screw ! Done.
Parts Used:
Meat Drawer Rail - Right Side
  • Thomas from Flushing, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice maker was not making ice, no water flow into.
watched the youtube video from PartsSelect and was able to remove old water inlet valve easily and install new one with little effort. The hoses on my refrigerator were a bit different than shown in video, but I was able to modify them and it's working just fine now. Thank you PartsSelect !
Parts Used:
Refrigerator Water Inlet Valve
  • Mary from Mt Pleasant, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
When I opened the door, sometimes the light was not turned on.
With the help of a knife we took out the light switch unplugged it, plugged in the new one and it started working.
Parts Used:
Light Switch
  • Helen from Burnsville, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
i broke door shelf jusy before Mothers Day Opps
opened package the tough part slid into place
Parts Used:
Bottom Door Bin
  • bruce from Helena, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
would not make or dump ice
Turn ice maker off. Loosen two screws. Lift ice maker off. Pull plug apart. Remove icemaker. Plug new ice maker in. Mount to screws and tighten. Turn on ice maker. Then you can stop cursing icemaker..Fixed!!!!!
Parts Used:
Rear-Mount Ice Maker Assembly
  • Dwight from Parsons, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Rails had cracked and drawer would not open without being held with a hand under it.
Took drawer out, took shelf out. Took old rails off shelf, put new rails on. Very Easy!
Parts Used:
Meat Drawer Rail - Right Side Meat Pan Rail - Left Side - White
  • Patricia from Prairie Grove, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the PHS69EHSS3
526 - 540 of 729
Back to Top