MDE16PRDYW Maytag Dryer - Instructions

Actually I followed the installation instruction video provide by this website. Instruction videos are excellent for those of us that don't do this very often. Also, I would like to comment on how fast my part was delivered. I ordered it online one afternoon and it was at my door the very next morning.

Followed the videos associated with the parts. NOTE: two videos showed turning the belt smooth side toward the drum, one showed it ribs toward the drum. Important thing is to assure the ribs fit into the grooves on the motor pulley with no twists in the belt.

Ordered part ( door latch ) flowed instructions easily fixed same.

I watched an online do it yourself video that showed how to open the dryer cabinet. It was extremely easy. I unplugged the dryer. Unscrewed four screws and two hex nuts to remove the door and open the cabinet. Then unscrewed two hex nuts that held the broken baffle. Replaced the baffle. Screwed everything back together and the dryer is like new. Saved a lot of money not having to call a service technician. If you can turn a screwdriver, you can make this repair.

Took the front off, 4 nuts to remove drum support, removed drum, replaced roller, put it all back together reverse order. Popped the switch out pulled off wires and stuck new switch in replaced wires!

watched video ( thank you youtube) but did not have to take door apart - easy !

followed video instruction down to removal of drum, then removed circling, determined idler pulley bearing had worn and scored idler arm shaft, so ordered both. while dryer apart, I removed and regreased drum rollers, checked all sensors and cleaned out dust and lint from a decade of drying. everything went back together easily since I took good pictures with I pad.

The repair was relatively easy. You will need snap ring pliers to remove/install the drum rollers and a rivet gun to install the front guides. I also replaced the drive belt. I completed the repair myself, however it would be helpful if you had someone to hold the drum in place while you installed the belt. After a complete interior cleaning the repair took about 90 min.

removed the dryer front then removed the drum. replaced the drum roller shafts and nuts. then reassembled the dryer. Note: only one shaft loose but replaced both while dryer dismantled.

Remove front cover of dryer and drum. Replace

What sounded like a drum roller problem, actually turned out to be a blower fan problem. Replacing the plastic blower fan which is mounted to the motor shaft is simple easily accessible from the front of the machine.

At first thought the belt was the culprit but with further research found it to be the drum roller. I watched the installation video on this site for belt replacement and replaced both drum rollers and belt idler roller while the dryer was dissassembled. The repair was very straight forward although the belt was somewhat difficult to install on the idler roller(had to hold tension and place belt on roller with one hand).The video was very helpful and now the dryer works great.Thanks

I was VERY please that the new roller came so fast(next day). I followed the excellent instructions on the video. I found the reason for the failure of the roller was the original roller had a metal wavy washer behind the roller and it broke apart and was ground up on the shaft which caused it to seize up. The new roller kit came with fiber washers. The video made this a very positive repair experience.

I repladed the idler pulley and I just followed the directions on the parts select video. The video was a great help. The only thing I did different was I didn't unhook the wiring when I took off the front of the dryer since there was enough wire I could just flip it on the side of the dryer out of my way. Other than that I followed the Parts Select Video Directions to the tee. I just wish I would of ordered the Idler Pulley shaft also because I didn't realize it was pretty worn too, but I plan on ordering another pulley and shaft as soon as it starts making that auwful noise again.

Too simple to describe.