All Installation Instructions for General Electric Refrigerator GTS18UBMCRWW

Light went out in refrigerator

Pop out switch, pull wires, attach wires to new switch and pop back in. Easy smeasy!

Parts Used:

Light Switch

Gary from EAST JORDAN, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Light was flicking

It was way to ez to install only a couple of minutes that's it

Parts Used:

Light Switch

Stephanie from KEARNY, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Change bulb

Easy

Parts Used:

Light Bulb - 40W

Louis from LEAGUE CITY, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

3 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken light switch

took a little more effort than the video show to remove old module and replace new. Works fine now.

Parts Used:

Light Switch

Ted from SANDWICH, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The door activated light switch was missing.

Pulled the two wires out from the access hole in the lower part of the refrigerator. Put them in the spade connectors on the new switch, and pushed the switch into place.

Parts Used:

Light Switch

Don from Eugene, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Fan stopped working, Ice maker burned out

Fan Quit So did the Ice Maker. $150.00 worth of parts plus my time. Also the Freezer Floor cracked for some stupid reason.

Parts Used:

Compression Ring

Evaporator Fan Motor

TODD from PLAINVILLE, CT
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Didn't order all the parts that where needed to put tilt bin in freezer door the first time.

Had to order the other parts to connectit to the door. Than I was able to put together on the freezer door.

Parts Used:

BIN TILT OUT FZ (2L)

Robert from Raritan Boro, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Bad switch for door prevented interior light from coming on

Just as your video described, although due to the age of the fridge, it took a bit longer to remove the defective switch. Your video made this so simple, I can't imagine why we lived with a dark fridge for so long! I was ready to buy a whole new fridge, as repairmen are often nonexistent for small repairs. I am the biggest fan of your company & it's repair video. THANK YOU SO MUCH

Parts Used:

Light Switch

Patricia from Sylva, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

0 of 1 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Cracked Dairy Door

PartSelect shipped me the part and it arrived in less than 3 days. It took longer to unwrap the excellent packing than it did to pop the new door into place. Wonderful!

Parts Used:

REFRIGERATOR CLEAR DAIRY DOOR

Fr Kerry from Washington, DC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Center slide missing on crisper drawer

Took out the drawers slipped the new track into place and replaced the drawers.

Parts Used:

Drawer Slide - Center

Deanna from Glendale, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

0 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

light in freezer section not working

Using plyers Pulled old switch down and out. Put new one in and pushed new switch up into position. The switch plugs into the contacts, no wiring needed. Worked like a charm. You saved me 200 dollars GE repair bill. Thanks

Parts Used:

Light Switch

Victor from Fort Myers, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

6 of 24 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Frezzer would freeze up, refrigerator stayed cold, solved the problem. Now the refrigerator seems to be running more than usual.

Checked the defroster coil which is located behind the rear panel in the freezer compartment, it was still working. Followed the schematics down to the defrost timer, which is located in the lower front of the refrigerator and tried that. Plugged in the new part and the problem is solved.

Parts Used:

Defrost Timer - 120V 60Hz

Henry from West Seneca, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

frosting over and freezer not cold enough and not circulating cold air .

Defrosted the refrigerator,power off and cut the 2 wires on thermostat and sodered the new one on and shrink tube sealed the wires,refrigerator works like new!

Parts Used: