Aerator Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Aerator Parts
Your Price
$12.06
On Order
Your Price
$36.73
In Stock
Aerator Carburetor Rebuild Kit
PartSelect Number PS8983479
Manufacturer Part Number 495606
This is the replacement carburetor kit for your small engine, used for outdoor power equipment. The carburetor rebuild kit includes the float, needle, gaskets, and seals that you need to refurbish your carburetor. The carburetor is essential to proper engine performance so if it is dirty or damaged, it is recommended that you repair it using one of these carb kits. If basic adjustments to your carburetor will not fix your engine issues, it is an indication that you should repair the carburetor with this kit. The parts included in this kit are OEM parts sourced directly from the manufacturer.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Steven C from CENTREVILLE, MI
Old diaphragm dried up
Tore carburetor off leaf blower and replaced. To do that require taking off the air cleaner removing the gas tank and all the brackets holding the controls on it. And keeping track of all the screws and Wires that control choke and throttle. I took several photographs. I did not need all the gaskets and jet’s that were included in the kit but it had what I needed.
Read more...
Your Price
$5.96
In Stock
Aerator Key-Ignition
PartSelect Number PS9051002
Manufacturer Part Number 63-8360
This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental or unauthorized use of the equipment. A broken key might be loose or hard to turn. In some cases, it might have completely fallen out of the switch. Without the ignition key, it will be difficult or impossible to start the engine. Locate your ignition key by reading your user manual. To remove a stuck ignition key, you may need to use a small amount of lubricant on it. While turning the key in the ignition switch, gently wriggle it back and forth. There may also be a release button that you could press, depending on your model type. This replacement part is an OEM product and is sold per unit.
Installation Instructions
Michelle from AYLETT, VA
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Read more...
Your Price
$6.13
In Stock
Aerator 3/4" Flange
PartSelect Number PS9975235
Manufacturer Part Number 539000316
This genuine OEM bearing flange is 4 inches long and 2.5 inches wide. The flange is used to secure bearings (sold separately) to provide support moving parts in aerators, such as the rotating shafts/axles. Each bearing in your aerator requires two flanges each. This protects the parts from friction damage and allows them to spin smoothly. The flange also helps to secure the bearing in place and prevent it from coming loose or falling inside the equipment. You will need to replace your flange bearing if your equipment is making grinding noises during use or if the flange is corroded, or chipped. Each flange is sold individually.
Your Price
$18.84
In Stock
Aerator Bearing
PartSelect Number PS9975236
Manufacturer Part Number 539000317
This is a genuine OEM bearing which is designed for use with lawn and garden equipment and is sold individually. Made of high-quality metal and measuring at a 1-inch inner-diameter, this bearing will likely need to be replaced often because it is a high-wear part. This bearing is used to distribute weight evenly using small inner balls within the bearing itself, and the locking collar fastens the bearing onto the shaft to reduce movement from motor vibrations. If you are unsure of how many bearings your equipment will need, make sure to check any available diagrams.
Your Price
$3.99
In Stock
Your Price
$18.43
In Stock
Aerator Bearing, 3/4" W/Locking Collar
PartSelect Number PS9975234
Manufacturer Part Number 539000315
This steel bearing is an OEM replacement for aerators and has a .75-inch inner-diameter. Bearings have tiny balls within them which are used to distribute weight evenly and minimize friction between two moving parts. It is sold individually but comes with a .75-inch inner-diameter locking collar as well, although a stamping kit is sold separately. The locking collar is used to tighten the bearing on the shaft, to reduce the effects of vibrations during operation, like slipping. It is made of high-quality metal but is considered a high-wear part meaning it will likely need to be replaced often.
Your Price
$4.99
In Stock
Your Price
$3.99
In Stock
Your Price
$95.58
In Stock
Popular Aerator Models
Below are the most popular Aerator models we have. Enter your model number in the search box to find your model.
