GHW9150PW1 Whirlpool Washer - Instructions

It was easier than I thought it would be: 1. Order the parts 2. Upon arrival, went back to the website to get an idea as to how to install the parts. 3. Although a little apprehensive at first, the replacement and installation of the parts went flawless and was doing the laundry 15 min. Later. Done!

replaced in less than 5 minutes

I did not replace the pump body. I just removed the motor with the 3 screws. Put the new one on. This way I did not need to mess with the hose clamps.

Found it impossible to get the bellow off the machine. Removed the front spring. Even tried to but off the bellow. No luck. Called repairman. He had to take off the front panel, door panel, and the top of the machine before he could remove the back spring/clamps.

I watched video first and it help me a lot to do the repair myself of my washer machine and i save about $ 1,500 dollar. Thanks

Pulled washer away from wall, unplugged power from outlet, shut off water valves and removed hosed from back of machine. Removed the 3 screws on the back top of washer that holds top on and removed top. Unplugged the 4 wires on the back of the valve, removed the screw that holds the valve in place, pulled the valve out so I could remove the hose clamp and hose from the valve. I then reversed the operation. It is really pretty simple.

Repairs were very simple. Turn off the electricity to the machine. Remove approx 5 screws in the back of the top cover. Remove the cover and the micro prossessor is located towards the back of the machine. Very easy to get at. Just unplug the wires one at a time from the old one and place it into the new one. I also took a picture of the wires on the old processor before I started just in case I messed up. Put the cover back on the washer and it worked great.

I looked up the repair on YouTube. The exact repair was there. Remove the ring around the boot. Remove the part of the boot by the latch. Remove the latch. Replace the latch . Refit the boot. Replace the wire ring making sure the spring is down. Taadaa! The guy on the video took two minutes or so. It took me seven because I was very deliberate in my work, and it was the first time I had done this repair. The wife was very pleased!

My son pulled the washer out and found the parts that was leaking. He ordered the parts from your company. they arrived the next day and he re-pared the leaks and all is well.thank you

The product came on time and was perfectly rapped , it took me 15 mins to install after watching you tube videos on front loader washer . I was happy I didn't have to call a service man in . . . .

2nd screwdriver I tried worked fine. unscrewed the broke one and replaced the new one. very simple. We take good care of our house items and i,m so glad when you can get parts years later.

remove old worn parts , there was a little difficulty removing one screw due to rust but otherwise it went well.

pulled the front and top of the machine off, pulled off the old bellow, ordered the new bellow, and put the new bellow on. we looked on youtube.com for a video on repairing the machine.

Gave handle to husband who installed it in less than 15 minutes. Your service was great!

Very easy repair, once I read the reviews and watched a couple of you tube videos. I just released the band holding the gasket in place, pulled it back, unscrewed the latch and installed a new one. Less than a 10 min job. I am glad I found this web site, thanks guys!!