10659422801 Kenmore Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Freezer Ok. Refrigerator Not Cooling.
Followed recommendations from others but went with most likely by percentage = defrost timer kit. Did not solve issue. Then went with bi-metal thermostat and that did not fix the problem. Tested the thermostat as recommended on line and old part was bad, new part ok. Then I saw on line that I should have listened for fan operation. I checked and found the fan motor to be defective. Replaced the motor and refrigerator worked fine. Both the motor and bi-metal thermostat were required. Should have checked fan operation first.
Parts Used:
-
Donald from Kissimmee, FL
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
When you pressed on ice maker to get ice it was hard to get it to dispense
I followed along with the Video from the web site. I used the masking tape to keep the electric parts out of the way. one of the attaching points for the new ice door broke off so i used J B Weld to reattach it. then the repair was finished with out a hitch. The time was extended by the need to wait for the epoxy to cure
Parts Used:
-
Dennis from Gig Harbor, WA
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken roller wheels
Followed the instructions on package, went extremely well, with no problems what so ever! Thanks so much for the part and how to do list!
Parts Used:
-
Joseph from Tyrone, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Ice dispenser guide missing and ice dispensor switch broken stays
The ice dispensor guid went in very quickly - just as the video indicated. The rear, side stays were a little tight, but it now works great. The plastic bracket holder for the water and ice switches had broken holders for the ice switch. The video was very clear, and disconnecting the electric above the door made the job easier. My arrangement is a little different from the video (no screws holding the outside cover no the inside bracket box). But, the repair went quickly and I would have had a lot of extra problems without the video as a clear and detailed guide. My only wish was to have seen the videos before purchasing the parts. I highly recommend your parts, quick delivery, reasonable prices, and excellent video repair guides. Thanks,
Parts Used:
-
Richard from La Quinta, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice dispenser was broken
My handyman did the repair. It was pretty easy for him. It would have been a real puzzle if we had not watched the video instructions. The new parts were slightly different than the old parts, but they fit perfectly. I thawed the frost buildup around the ice door and the opening of the ice bin with a hair drier, to get the ice to come out properly. Thank you so much for the video!
Parts Used:
-
Helen from Escondido, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
water dispencer not working, ice maker is working
This was not a through the door unit. The water dispenser is located inside the refrigerator. Unplug the refrigerator. Remove the two screws holding the cover over the dispenser parts. Could not remove the cover completely as there is a water supply line attached. Let the front of the cover down as far as you can get it. The micro switch is reachable. Move plastic retaining posts holding the switch in place, to the side to release the switch. This can be done with your fingers. Pop the switch out. Use the blade of the screw driver to gently pry the electrical connection plug away from the switch. Attach the new switch to the plug and put everything back in the reverse order of disassembly. Done, easy, even I could do it.
Parts Used:
-
Earl from birdsboro, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
We just bought a home with the refrigerator in it. The Water Filter Cap on the refrigerator was not there.
I had already hit the eject button and nothing happened. I could not get the filter out. I read the instructions, got on line and ordered the water filter cap. In the meantime, I worried about getting the filter out. I tried pliers and then I found after several tries and a lot of frustration, a lid off of a spray can that fit. I could have waited until the cap came in, but me being me, I could not wait. I worked the filter out, but waited until the cap came in the mail to finish the job. . I put the cap on the filter inserted it and finished what I had started the week before. Simple once I had the cap.
Parts Used:
-
Kathie from Granbury, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Door bin cracked
Removed all the food and lifted out the old part. Washed the new bin and installed the new part
Parts Used:
-
John from Fort Worth, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Stopped making ice.
I removed the ice maker, researched the part number and ordered the part. I followed the instructions and Iinstalled the part.
Parts Used:
-
Allen from Oakwood Village, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice dispensor door would not close, dripped water, frosted inside freezer
Google refrigerator Model #, found your site, saw parts diagram right away, clicked on part 'Ice Door Kit', noticed your video on how to do repair yourself, showed it to my husband, ordered part, and it arrived the next day. That was the hardest part of the whole repair. I have been without use of the ice dispenser for about 9 months - took 20 minutes from opening box to getting ice again and saved myself a whole lot of money. I am one happy camper!!!
Parts Used:
-
Gail from Palos Heights, IL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator Freezer Ice Door Broken
Job went as per your terrific video. Except that when attempting to retrieve the old heater element the glue on the old door was no long pliable. I had to literally tear the old foam apart to get at the heater element and almost damaged it. Not to worry. It worked out well and all is great. Thanks for the very instructive video.
Parts Used:
-
Peter from Wildomar, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
First Freezer; then refrigerator too warm
Debugged problem according to debug video; ordered part based on most likely part failure; part came in < 2 days; installed part based on installation video. Freezer and fridge both fixed.
Parts Used:
-
Robert from Bolton, MA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Cracked Crisper Drawer
removed the damaged unit and inserted the replacement.
Parts Used:
-
Richard from Huntsville, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Lower Door Closing Cams Worn down
Openned both doors and removed lower grille. Closed doors and placed a piece of wood underneath door. The piece of wood slightly taller so that it supports and lifts the door while I worked. Working at the bottom of the door removed both upper and lower plastic cams and replaced with new ones. Be sure to tighten the single screw that holds down the plastic cam; if you leave them loose they will split/crack because they will move as you operate the door.
Parts Used:
-
Raul from Miami, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Very Noisy
I followed the instructions provided on a video that was shown when I went to order the required parts. The video was very well done. It is very accurate.If you fololw the instructions you can make the repain in about 30 minutes. It was very easy
Parts Used:
-
James from Fort Myers, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!