Models > 10659422801 > Instructions

10659422801 Kenmore Refrigerator - Instructions

All Instructions for the 10659422801
1231 - 1236 of 1236
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice auger drum had cracked and would not dispense ice
Great! I actually replaced the Auger Drum while watching the step by step video on my PC. Do not think I could have completed this replacement so quickly without the video. I would recommend PartSelect to anyone. Thanks
Parts Used:
Ice Bin Auger Drum
  • Frank from Seaford, DE
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No ice when you push the lever
After watching the vidio I think my wife could have done this repair. It took me about a half hour and the job was done. It cost me $20, No telling what a repair man would have charged. Thank You.
Parts Used:
Control Bracket
  • Michael from fayetteville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken Auger
Was easy, removed several screws and a clip on the auger shaft. removed broken part and replace with new then reassembled
Parts Used:
Ice Bin Auger Drum
  • John from Columbus, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
plastic auger broke apart
The only problem I had was the nut at the end turned the opposite direction. Once I realized that I took it apart in sequence and it went right back together. It helped me in that I slid all the parts off the auger shaft onto another small rod I had and then slid them right back on. Was no problem
Parts Used:
Ice Bin Auger Drum
  • Allen from Danville, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
ice maker did not work replaced it but still no ice
removed three screws
Parts Used:
Ice Maker
  • Jack from Spearman, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice Maker quit working
Had to Test Seloind. It Was OK. Then tested Motor Motor For Ice Maker. It Was Bad. Went Online Looked Up Parts For My Unit. They Were Shipped in a Timely Manner, only a few days. Installed parts in less than 15 minutes. Went very easy. Thank You
Parts Used:
Icemaker Motor Kit
  • David from Castalia, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10659422801
1231 - 1236 of 1236