BBB A-Plus
958927-1-M-GE-WD12X10117-Tine-Retainer-Clip.jpg
958927-1-S-GE-WD12X10117-Tine-Retainer-Clip.jpg 958927-2-S-GE-WD12X10117-Tine-Retainer-Clip.jpg

Tine Retainer/Clip

PartSelect Number PS958927

Used to hold the tine row or combs in place on the dishwasher rack. *** Sold Individually.

This part works with the following brands: GE, Hotpoint & Kenmore.

In Stock

  • Compare At

    $1.99

  • You Save

    $.33

  • Your Price

    $1.66
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-2 of 2

 

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerTheresa from St. Anthony MN

All the wheels on the lower rack of the dishwasher were going bad

We took off the old wheels, pushed the axles into the new wheels, then installed onto the lower rack. Works great, slides beautifully!

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 48 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerMark from Omaha NE

Control module went out - causing the heating element to super heat, melting several of the plastic interior parts

I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-2 of 2