958926-1-S-GE-WD12X10116        -Tine Retainer
958926-1-S-GE-WD12X10116        -Tine Retainer 958926-2-S-GE-WD12X10116        -Tine Retainer

Tine Retainer

PartSelect Number PS958926

This dishwasher retainer connects to the removable tine.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $2.83
  • You Save

    $.47
  • Your Price

    $2.36
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 4 reviews What's this?
1-4 of 4
 

1 of 3 people found this instruction helpful

Parts Used

  • Tine Retainer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerThomas from Louisville KY

Lower rack wheel retainers broke an the wheels fell off

put the new retainers on the wheels then installed them back on the rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerSean from Zillah WA

Replaced middle spray arm

Took me 15 min to repair. Part was diffrent origanal different than origanal very easy wish diagram on website was easier to understand. Wish u new part was different from origanal. But for the most part dishwasher is pretty simple to replace parts

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerTheresa from St. Anthony MN

All the wheels on the lower rack of the dishwasher were going bad

We took off the old wheels, pushed the axles into the new wheels, then installed onto the lower rack. Works great, slides beautifully!

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 84 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerMark from Omaha NE

Control module went out - causing the heating element to super heat, melting several of the plastic interior parts

I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4