266269-1-S-GE-WE18X54           -Lint Filter with Frame
266269-1-S-GE-WE18X54           -Lint Filter with Frame 266269-2-S-GE-WE18X54           -Lint Filter with Frame 266269-3-S-GE-WE18X54           -Lint Filter with Frame

Lint Filter with Frame

PartSelect Number PS266269

This part may differ in appearance, but functions same as original.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Takes too long to dry.
  • Compare At

    $39.60
  • You Save

    $6.60
  • Your Price

    $33.00
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 21 reviews What's this?
1-15 of 21
 

22 of 24 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJoAnn from St Petersburg FL

My old filter had a broken frame and ragged screen

Replacing the filter only required removing the old one and replacing it with the new part which fit perfectly. I received the part two days after placing my order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 11 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerFrank from Lakewood CO

Dryer performed erratically. Timer stopped. Heat element would not come on.

Removed two torx screws from the control panel. Removed timer with socket wrench and disconnected socketed electricals. Everything went slick.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKatherine from Washaington DC

Lint filter screen was broken

Remove old one, put the new one in!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers

CustomerNancy from Dalton PA

My dryer was starting to throw a lot more heat than normal. I clean my lint filter every time I use the dryer. What I didn't realize was that over time, the lint filter had warped enough to allow lint to escape into the dryer and subsequently into the dryer vent system, clogging some areas almost

I opened the vent system (screwdrivers to loosen screws) and used the shopvac hose and my hands to clean out what I could. I also snaked the shopvac hose down into the dryer and removed clogged lint. Then I just replaced the lint filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerfrankie from east windsor NJ

Door handle was broken off and I needed a new lintfilter

door handle just snaps right in and the lintfilter is a no brainer. thank you very much partselect keep up the good work

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerEric from Country Club Hills IL

Old lint filter got worn down over time and broke in half

I repaired it by logging on to parts select website and found the part, waited for about a week or so and opened up the box. I glanced at it and found out that wow it's the exact match except new. Unbelievable and in excitement I went to my laundry room and opened up the dryer and popped that baby right in! Thanks Parts Select

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCarrie from Santa Maria CA

Torn screen in lint trap.

Easy. Take old one out, put new one in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMark from Teaneck NJ

My ge hotpoint dryer would not completely dry clothes due to rusty and clogged flint filter.

I just pulled out the old white frame by hand and replaced it with a new one ordered online. No tools were needed. Simply easily, anyone can do with no required skills.

This saved the appliance from possible damage due to poor ventilation and also save the cost of a handyman to fix the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMichael from Beverly MA

Lint basket had hole

Pull old one out stick new one in. Less than 1 minute. Last repair was the water pump that was easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDan from Erie PA

The lint filter was cracked/ screen came off

Very simple. Took the old 1 out and placed new filter in.
The impressive thing was I ordered the part on a Saturday and received it on the following Wednesday. Thank you! I will for sure recommend your site to my family/friends.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerMary from Worcester MA

Broken rail...ripped screen in lint screen

On the broken rail, I removed the screw and replaced the rail with the new one.

Simpily, just exchanged the Lint Screen in my Dyer

I was most impressed by the amount of time it took to order the parts and to install them. Within 24-25 hours I ordered the parts and installed them .That was GREAT !!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerWilson from Albrightsville PA

Dryer timer function stopped working & the dryer will not shut off also, the lint filter was torn..

I unscrewed the backside top part of the dryer with a 5/16 nut driver then, removed the damaged timer assuring I marked the wires harness correctly with the new timer. I removed the damaged timer and inserted the new timer I then replaced and screwed in the backside top of the dryer. The Lint Filter with frame removed without difficulty (without any tools) and, I installed the new Lint Filter with frame with no trouble. The Job was completed in less then 12 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMyrna from LaGrange GA

Old filter frame was broken

All I had to do was take the old filter out and put to new one in. It was easy and took less than a minutes time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJean from Ogdensburg NY

The lint filter on my dryer was cracked in two different places and I needed a replacement.

I got out the original bill with the model number and went to the website and measured the length of the lint filter and ordered the replacement part. Excellent delivery service.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Lint Filter with Frame

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Columbus OH

Old lint filter was broken

Replaced the filter. Was very impressed how quick I received the product, no hassel... Nice...

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 21