Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS247275
The microwave glass light lens protects the light bulb inside the appliance. It is clear in color and measures approximately 6-1/2 inches long, and 2-1/2 inches wide. You may notice that this part is cracked or broken and will need to be replaced. You will need to remove the screw holding the cover in place. Unhook the cover from the bottom panel. Bend the tabs up that are securing the old lens in place. The textured side should be facing up. Place the new lens into place and secure back into place.
This part works with the following brands: GE, Hotpoint & Kenmore.
Used a phillips head screw driver and loosened the lens frame under the microwave. Removed the broken lens and replaced it with the lens ordered. Put the lens frame back in place and secured it with the phillips head screw.
Help other customers find the most helpful instructions.
Were these instructions helpful?
All one has to do is use a screw driver to remove the screws, one per lens.Then lower the lens bracket, bend the 4 tabs holding thelens, remove and replace the lens and screw the brackets back in place.Less than 10 minuits.
Unscrewed the lens, it hinged down, then I could remove the frame. Pulled old bulb out and replaced with new one. Replaced broken glass in frame. Reset hinge into the holes and swung it up into place. Screwed it in. Very easy!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.