| |
15 of 20 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSusan from Hollywood FL
The plastic knob broke and wouldn't grip the steel movement
all i did was put the three pieces together (1-2-3! so easy) and attached to the metal piece of the dryer. now i can set the dryer to any temperature and time i need!
|
7 of 7 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerCarole from Wappingers Falls NY
Dryer timer not working - timer dial skirt broke
I ordered a new timer skirt and also a new timer knob(only to be safe) and they arrived the next day! I watched the instruction video on your website and it showed me how to take apart the skirt knob and cover. It was so easy. I reassembled the three parts which took about 2 minutes and put it back on the silver post that holds the timer dial. It worked as good as new. My husband was proud of me. I have recommended your website to my friends.
|
5 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJorge from Longwood FL
Timer knob broke from the middle.
Researched for the part numbers and found the parts needed. In this case the timer knob is made up of 3 separate pieces that easily snap together.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customerdawn from frisco CO
Time knob had broken
Removed clip that held timer knob in place, replaced timer know with new one and reinstalled clip. The snapped on the new cap. Took a whole minute to do.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWayne from Hamilton MT
Knob retainer hole was broken
Ordered the part..... waited a few days fro it to arrive, (it came quite quick considering). Sat down in my easy chair and assembled the knob and gave it to my wife to slip it on the dryer. Whew, I was beat.... hehe
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerdenise from lake worth FL
Knob not working and would not turn off dryer
Wow it was the easiest thing I have ever done.. I am NOT a DIY person.. Company wanted $108.00 to do, it cost me less than $20.00 and 2 minutes.. I have told everyone I know!!! Thanks
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerScott from Shorewood MN
No heat
Replaced the igniter and the primary coil. Igniter now glowed but no gas. Replaced the secondary coil and bingo, it worked. Sounds like a common issue. I'd order both coils together and the igniter if you have the same problem.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJeannette from Carencro LA
The timer dial broke
I pulled the dial off. Fit the three new parts together. I put in stem of the timer and turned the dryer on.Very easy, No tools required except a screw driver to pry the old knob off.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerThomas J from League City TX
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDiane from Seabrook TX
Threading on dryer dial knob stripped.
Discovered the problem then did an internet search for the part ordered and received it in 4 days.
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerWAYNE from PHILADELPHIA PA
Door would not lock, knob broken
called SEARS told part not available any longer. Would have to purchase new dryer. Also told part could not be ordered from MAYTAG due to age. Called PART SELECT and had new parts in four days. Put new knob on, Placed door lock in hole, JOB DONE (15 minutes) saved $ 500 to $600 on new one. Wayne
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMelissa from Albuquerque NM
Broke the knob for dryer selection
hey this was so easy that 6 year old could put the parts together..I loved this! No repairman and no going to an appliance store and getting frustrated.Easy as pie!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerGayle from Kingman IN
Knob for dryer was broken and lint filter had a hole
Simple...put knob together and put in place. Lint filter...put in place!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJulie from Los Angeles CA
Dryer would not turn on
The piece inside the part was cracked so I could not turn the knob and engage the dryer. I took the dial off and found the parts on PartSelect.com Their diagrams were incredibly helpful. I pulled the old knob off, snapped these two new parts together and put the knob back on....problem solved. I confess, as a woman whose husband does all the repairs in the house, I was very proud of the fact that I solved this one on my own. For $20. I saved mega $$ on a house repair call and parts replacement charge. Thank YOU!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
Customerjim from oklahoma city OK
Broken control knob on washing machine
the pictures on your web site allowed me to positively identify the 2 pieces quickly and surely. replacement was a snap and took less than 2 minutes. Thanks!!
|