Quick Question!

Have you ever purchased from PartSelect.com before?

1483448-1-S-GE-WR32X10595        -Pan Cover Glass
1483448-1-S-GE-WR32X10595        -Pan Cover Glass http://www.partselect.com/Schematics/GE/00120714i07.gif

Pan Cover Glass

PartSelect Number PS1483448

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$13.73

You Save

$2.29

Your Price

$11.44
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

6 of 11 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Nicole from Fayetteville, NC

Broken pan glass cover

I just slid the pan cover directly in there slots. I would definitely reecommend this company to others. The shipping was done quickly. The parts were exactelty what I needed. The site made it easy to find the exact parts I needed.
Thanks part Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Robert from Laredo, TX

The refrigerator was not cooling. The freezer was not defrosting.

After diagnosing the problem with the aid of PartSelect.com, I was able to identify the parts that I needed to replace. Repeating the same procedure for the repair, I unplugged the refrigerator.
I transferred all the frozen food items to a cooler.
I removed the shelves from the freezer.
I removed the back panel from the freezer and located the thermostat with the aid of PartSelect.com and the exploded view of the freezer. I defrosted the freezer with a hair dryer and sucked up water using a wet-dry vacuum. I located the thermostat and removed the entire assembly to simplify the repair outside of the freezer enclosure. I removed the thermostat by cutting the two wires that hold it to the wiring harness. I then soldered the wires back in place and covered my work in heat shrink tubing.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2