Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
March 8, 2023
Is there 1 screw that hold this solenoid assy in place? Do other screws need to be removed on the gas valve to replace it. No videos?? I've worked on others and it's usually 2 seperate coils that are easily replaced, This seems to be a diff assy. Looks like a possible phillips screw.
For model number MGDB750YW1
Hi Joe, thank you for the question. Yes, there is a single screw holding the gas valve solenoid in place. It is behind the coil and not visible, but you can see it with a mirror or just note where it is on the replacement part and you will figure it out. A small screwdriver is needed to remove it. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Keith
March 31, 2023
The pic is backwards from the one on dryer.
For model number WGD8800YC1
Hello Keith, thank you for your inquiry. Based on our research, the solenoid gas valve compatible with your model is part number PS11753819. It is used to open the gas valves while the dryer is running. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Rey
January 29, 2019
On the part wpw10368268 ,coil valve for the burner , is this a pair?
For model number WGD8600YW1
Hello Rey, Thank you for the question. The Coil Valve is a set that are attached to one another. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
