This is a replacement dome and blade assembly for your blender. This part connects to the bottom of the blender, and contains the blade. When the blender is running, the blade will rotate to chop any items that may be in the blender. If, when you touch the touchpad, the blender does not start, and the blade does not rotate, you may need to replace it. This part contains the dome as well as the blade. It is an OEM part from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Touchpad does not respond
This part works with the following products:
Blender.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP9704291 replaces these:
AP6013699, 9704203, 9704267, 9704291, 9706716
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brenda F - April 6, 2018
Verified Purchase
Replacement dome
Perfect fit for my 25 year old blender!Thanks. BFerguson
★★★★★
★★★★★
Mary A - February 15, 2018
Verified Purchase
it fit
nice to see that it indeed fit the blender
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The drive coupling was stripped
This is my favorite blender and I wasn't willing to buy a new one without trying to repair it. I have replaced other components of the motor but the grooves finally wore out and needed replacement so that the blades would rotate. I really didn't need the dome assembly but thought the new blades would be sharper so, might as well change
... Read moreit too. A flat head screwdriver was recommended for removal of the drive coupling. I found that it was digging grooves into the metal ring in the base - which would not have damaged the operation - so I took an old pair of (very dull) steel calipers, covered the ends and it popped right off. I had it up and running in less than five minutes.
KitchenAid Blender: The directions said to use a screw driver to pry off the old drive coupling, and then clean out any remaining broken pieces. The drive coupling screws on so that did not make sense to me. I called KitchenAid and they gave me a number of the closest KitchenAid dealer. I was told that I needed to be careful not to be
... Read morend the drive shaft; I would need to find some way to secure the drive shaft from turning while unscrewing (a reverse screw) the drive coupling. Find the appropriate size thin ignition wrench. Remove the old coupling and screw on the new coupling.
The drive coupling on my Kitchen Aid Blender shattered into dozens of pieces. Found this website and realized I could buy a new one. Could not remove coupling base with "official" instructions. However, user comments on how they removed coupling base very helpfull. Put thin blade screw driver thru hole on bottom of blender base, held t
... Read morehe blade from turning and twisted the coupling base off. Very easy and quick. New one when on just as easily.
All I had to do was replace the part! Service was excellent! Ordered the part and had it the next day and my blender was up and running!!
Nora from Lodi, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
12 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blades On Blender Locked Up
Piece of cake. Part was expensive and shipping likewise. Very fast
PAUL from LAWRENCE, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Slow, Intermittant Discharge
First I disconnected the washer and used a shop vac to suck out remaining water throught the effluent tube. I then pulled the washer out from the wall and opened up the panel in the back where I saw a penney in the baffeled catch basin and, a wad of lint wrapped around what looked like three 7" wires. I opened up the top with the putty
... Read moreknife and flipped it bacl. I then proceded to remove the top sections of the tub (soap/bleach dispenser, etc) then I removed the dome using a stubby screwdriver to 'pop' the internal catches. The next thing to come out was the perforated baffel. I could see the blockage through the drain holes in the bottom of the tub. I made a hook out of a coat hanger to extract the wad and 'wires'. Also, a pair of needle nose plires were used to pull the wires through the tub holes. Rhe unit was then re-assembled and has worked fine since. The 'wires', it turned out, were identified by my wife as the wires from some of her underwire bras! They will get handwashed henceforth!
Read less
DAVID from GLEN MILLS, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
4 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
November 19, 2019
Need new dome with new blade....
For model number KSB5WH
Hello John, thank you for contacting us! This Dome and Blade Assembly part number PS11746926 is the compatible replacement for your model blender. Good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Leann
July 8, 2019
Will this blade assembly work on this model?
For model number Ksb3wh
Hello Leann, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS357133 and was only sold as part of the jar assembly. I looked up the part and it is listed as No Longer Available/Discontinued. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Rao
April 15, 2018
Will this part work for the KitchenAid household blender model: Ksb3wh4?
For model number KSB3-4
Hi Rao,
Thank you for your question. Yes, this would be the correct part for your appliance. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lori
November 8, 2018
Will dome and blade replacement for ksb5er4 work on my blender which is earlier model?
For model number Ksb5er3
Hi Lori,
Thank you for your question. Yes, this dome and blade assembly will work with your blender. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Pete
January 21, 2018
The blade doesn't spin . Do i need to buy the whole spinner ?
For model number KSB5WW
Hello Pete, Thank you for your inquiry. The blade only comes as part of the dome and blade assembly, but I would also check the drive coupling underneath part# PS11746921. Hope this helps!
Was this helpful?
Thank you for voting!
Charles
January 24, 2018
What is the part number for a blade which will work on my blender, which has a screw on lid?
For model number KSB3-3
Hi Charles,
Thank you for your question. From what your appliance model number is showing, it looks like this is the correct part that you are looking for. The part information is above there for you. Part number: WP9704291. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Alistair
July 15, 2021
Does this blade fit? Serial number is wj2415739. Thank you!
For model number KSB5BU
Hello Alistair, Thank you for the question. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!
Was this helpful?
Thank you for voting!
Melissa
April 6, 2022
Will this dome blade assembly work with my Kitchenaid KSB5ER blender?
For model number KSB5ER
Hello Melissa, thank you for writing. Yes, the number PS11746926 you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
