Quick Question!

Have you ever purchased from PartSelect.com before?

11745759-1-S-Whirlpool-WP8286828-Spark Module
11745759-1-S-Whirlpool-WP8286828-Spark Module 11745759-2-S-Whirlpool-WP8286828-Spark Module 11745759-3-S-Whirlpool-WP8286828-Spark Module http://www.partselect.com/Schematics/Maytag/54723.gif

Spark Module

PartSelect Number PS11745759

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At


You Save


Your Price

Order within the next 10 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.7 / 5.0, 2 reviews What's this?
1-2 of 2

11 of 14 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers
Customer: nhung from chesapeake, VA

Two igniters didnt function and it continued to spark after the gas ignited.

Well, after I finally got the parts, the repair was easier than anticipated. You deffinitely want to lift the unit out to replace the spark module and swap over one wire at a time so you dont forget where they go, (important on a gas stove) When I pulled out the old unit I found it was just jammed in there when constructed, I expected more from Jenn-air, and the plastic casing was broke and pulled apart. Surprised it lasted this long. Also three of the ceramic insulators on the ignitors were broke or cracked. But over all the unit was fairly simple to repair if you take your time and practice safety. Remember, you are working with gas and electicity, and use soapy water to check your connection when you reconnect the gas line. Dont try to work on it still hooked up and in its mount . Disconnect it and lift it out.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Spark Module
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Mark from Cordova, TN

All ignitors on the cooktop would engage whenever any of the burners were turned on.

Replaced the spark module. Make sure you mark the wire locations on the existing spark module and install them in the same slots.

I was able to repalce without pulling the cooktop out. The access is from the bottom.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2