Models > KFGS306VSS03

KFGS306VSS03 KitchenAid Cooktop - Overview

Get Parts and Repair Help for KFGS306VSS03

If you know the cooktop repair part you need, you can browse the list of all parts on the KFGS306VSS03, or you can search by name or part description. You can also find your part by where it is located on the KFGS306VSS03 by selecting a section below. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$5.74

SCREW

Sold individually.

$21.66

Control Knob

Sold individually.

$6.54

GROMMET KNOB

$38.32

Burner Head - Right Rear/Left Front

$147.80

Pressure Regulator

This valve will automatically cut off the flow of gas when it reaches a certain pressure.

$17.42

Knob, Special Burner (1)

$38.32

Burner Head - Right Front

Burner head only.

$38.32

Burner Head - Left Rear

$36.14

Cap,Burner(Black) (RF)

$127.05

Spark Module

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

All ignitors on the cooktop would engage whenever any of the burners were turned on.

  • Customer: Mark from Cordova TN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 1 of 2 people found this instruction helpful
Replaced the spark module. Make sure you mark the wire locations on the existing spark module and install them in the same slots.

I was able to repalce without pulling the cooktop out. The access is from the bottom. read more