Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David M - August 18, 2018
Verified Purchase
great service
Part worked great. Part even arrived early. Will continue using this business.
★★★★★
★★★★★
Travis B - April 18, 2018
Verified Purchase
I received the part I needed and installed it in less than one minute. The washing machine was washing clothes 15 minutes after I received the part.
The part was exactly as the tech adviser and I discussed when I called. I received the part I needed in the time frame I was advised and I installed the part in less than a minute in my Whirlpool washing machine. The washing machine was washing clothes in less than fifteen minutes after receiving the part.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amos
December 15, 2017
What would cause this capacitor to go bad?
Hello Amos,
Thanks for your question. Capacitors can go bad due to high temperatures or power surges most commonly.
I hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Larry
October 11, 2021
Washer will not spin, I replaced the shift actuator still won't spin. Could it be the capacitor?
For model number WTW4800XQ1
Hello Larry, Thank you for the question. If the appliance will not spin or make noise like it is trying to spin, you may have a defective Lid Latch Assembly. The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning. We hope this helps!
The Whirlpool WTW4800XQ2 has decreased the number of agitations in its wash cycle from its 3 to 5 balancing agitations before it clicks then 3 to 18 agitations, (varys), before it stops agitating, and soaks until it clicks, drains, and spins. This is a decline from over 1,000 (plus) normal agitations. The machine drains, rinses and spins normally. Past 3 abnormal agitation performance runs, it ran perfectly once with over 1,000 agitations. I turned the machine over, examined it, and tightened all accessible connectors, but the machine still skips agitations. Could the problem be a failing capacitor (CAPACITOR W10804665)?
For model number WTW4800XQ2
Hello John, thank you for contacting us. The probable suspects of the problem are the shift actuator, part number PS11747977, and the capacitor, part number PS11703495. We would recommend testing both parts with a multimeter to pinpoint the faulty one. If this does not help, the issue is probably related to the control board, part number PS4704633. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
