All Installation Instructions for Frigidaire Refrigerator XGTI1845KR0

Support rail broke

I recieved the part within 48 hours. I snapped the part in place and I was done in seconds.

Parts Used:

Meat Drawer Rail - Right Side

Karl from Bellaire, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

10 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The meat keeper drawer kept falling

Backed one screw off each side of the shelf brackets, snapped old ones out, snapped new ones in and replaced the screw. Spend more time taking food off the shelf than it did to make the repair

Parts Used:

Meat Drawer Rail - Left Side

Meat Drawer Rail - Right Side

David from Mogadore, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

10 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Crisper Pan

Just removed the broken pan and installed the new one within 2 minutes. Really simple

Parts Used:

Refrigerator Crisper Pan

Deepankar from Novi, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

13 of 20 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

No shelf in Freezer compartment though obvious slots provided.

Used model # of frigidaire on your web site... reviewed parts available... noticed shelves abailable... zoomed in to measure using crosshatch background... measured my freezer compartment... seemed doable... ordered shelf... receivednext day... attempted to slip in slots... had to grind off 3/16th inch on two legs... slipped in... Perfect!

Parts Used:

Freezer Shelf

Joe from Dallas, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

10 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Leaking Door Gasket

Open door remove old gasket, remove new one out of packaging install new gasket

Parts Used:

Refrigerator Door Gasket

Ulrich from Ontario, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

12 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

refrigerator door would not fully close

Took old gasket off and put new gasket into place. Part came in the mail in 2 days. Hardest part was finding the model number of the refrigerator.

Parts Used:

Refrigerator Door Gasket

Elizabeth from Chicago, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Gaskets needed replacing

I watched u-tube and did the same thing. It was simple.

Parts Used:

Refrigerator Door Gasket

Freezer Door Gasket

Claire Ellyn from Inverness, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

10 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The Gasket was not holding tight and I replaced with a new one.

Just like you showed on you tube.

Parts Used:

Refrigerator Door Gasket

Kebreab from NASHVILLE, TN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My son pulled on the meat pan & cracked the right support.

The old support just unscrewed & then the new one screwed right on with two screws.

Parts Used:

Meat Drawer Rail - Right Side

Tina from Baroda, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

9 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freezer and refrigerator stopped cooling

The site offers a video for this part which worked perfectly. In addition to replacing the part, since the cardboard panel was off, we also cleaned all the dust off of the coils which someone recommended to do annually.

Parts Used:

Run Capacitor

Amy from PITTSBURGH, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

8 of 8 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker failed

Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.

Parts Used:

Refrigerator Ice Maker Assembly

Mary from SOUTH LYON, MI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

9 of 11 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Ice maker stopped working

Took off old part and installed new part

Parts Used:

Water Inlet Valve

Fred from Las Vegas, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

11 of 18 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

support rail had broken lower slide

Could have done it with my eyes closed! Removed shelf and drawer, then removed broken support rail. Removed screw from broken rail and put the new, two piece rail together using that screw. Snapped rail back onto wall...returned shelf to fridge...returned drawer to fridge...returned myself to sanity! Yee Haw Easier than installing it was ORDERING IT. I was amazed by the ease of that process. Your ordering site is incredibly easy. By the way...I am a blonde and for blondes everywhere...Look at what I could do :)

Parts Used:

Meat Drawer Rail - Right Side