WRS3R3EWG Crosley Refrigerator - Instructions

just put it in the old hole. the hard part was getting the old one out. you have to poke the center piece in to remove. otherwise you will break your fridge. then you have to to pull the center piece out before you put new in.

husband did it took only a few min part was easy to find

Easy to assemble after cutting original water line fittings off. Use sharp knife to keep from damaging end of water lines.

take of the tray & take parts out & installed the new ones

I figured out why no water and ice at door dispenser. Only a problem comes from a water supply valve. So I ordered parts assembly, and parts were arrived within 3 days. I replaced it, and then it worked OK since then. Regarding door shelf, it was cracked. So I replaced within 5 minutes. Anyway, I wanted to know when my parts arrive, so I called your Canadian operator, she was very nice. Just I want to say to manufacture of refrigerator, I wish they used batter parts. Because my refrigerator is less than two years old.

Removed the old, slid in and pressed down the new, and that was it.

All instructions included on this site are good. I would add only one thing to them. When removing the 4 water lines from the old unit be sure to pull up on the white rings while you pull down on the water lines. All else is a snap.

i was trying to figure it out but eventually it fix it self even when i get the part the problem seems to be fix on its own i unpplug the eletrical cord from the wall for over three hours and plugged back in and after 2 more hours it works so i am confussed dont know what happen i did not change any part so i have one brand new inlet water

It was simple... After paying $280 for a repair man to come out and install some unnecessary part to the fridge when I told him "everything on the Internet points to a thermostat repair." He disagreed, fixed the fridge and said the freezer would work more efficiently now. It didn't, so I bought a new fridge/freezer, put the old one in the basement. I ordered the thermostat (under $20), put it in, and now (knock on wood), works great and I have a beer fridge for the man cave

I followed the instructions on the Video and it was very helpful and I completed the job in 15 minutes. Greatest web site for helping with repairs. I would certainly reccommend this web site to anyone that would perform their own repairs

Ordered the part online and it came the next day. No problem putting in the new bin; it took less than a minute and no tools required.

Easily installed the new ice-maker. Rec'd the part in three days.

Just removed the glass and popped the plastic piece out. The new part fit perfectly. This part came overnight...awesome service, exactly right part, easy to find. Would definitely use them again.

This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.

I removed the cover on the door to access the levers that dispensed the water and ice. I was able to pull the assembly out far enough to remove the damaged part and install the new one. It was fairly easy because i have small hands and did not need to pull the assembly out too far. Otherwise it went fairly smooth and was done in no time. The fact that I am a woman had no bearing other than the small hands part. My husband could not have changed the part for that reason. The ease in changing the part saved us quite a bit of money by not having to call a repairman. the only authorized repairman is about 40 miles away and with mileage plus installation it would have cost a fortune and being on a fixed income ease of part installation is great for us older people. thanks for great product.