WRS3R3EW1 Westinghouse Refrigerator - Instructions

Took all food out of the refrigerator door. Pulled the door off by unscrewing the 3/8 hex-head screws on top and bottom hinges. The door is relatively light and removes very easy. Unscrewed and removed the broken plastic cam pieces and replaced with the new ones. Replaced the steel hinge, even though it was still in good shape. The hinge kit comes with left and right hinges as well as a spare cam insert with each hinge, so I still have all the left side parts and spare cam insert for the right side for a future fix if needed. The repair itself was extremely easy and took about 10 minutes; the total time that included emptying the food, cleaning the bottom grill plate and replacing the food was about 20 minutes of my evening.

remove two small bolts and unplug and install new

First thing I watched the video attcahed to the e-mail I received, and was happy to get that I am legely blind (vision 20/200) and must have someond read the instructions to me . with your video aqnd feeling for screw heads we did the job in arround one hour I got all screws out and new part in without any thing left over. James H. Meade

The unit came with a wireing harnes.The only thing that was not the same was the ADC unit plug.thats why you replace it.take the cover off and replace one wire at a time, plug the new ADC in and replace covers.I should have gotten the fan and the thermostat at the same time.The fan was my problem

I removed selfs,back covers. replaced wireing harnes on fan and hard wired the thermostat .very easy to fallow instuctions

Pull out the old clips,that were crack.The new ones are hanging off.I don'nt know if i should put some kind of glue,or something.To help it stick on.

While the kids were getting ready for school in the morning they took a small break to help me. They balanced the door while I removed the old broken portions with needle nose pliers which took more time than everything else. I had the 1 philip screw and two hex screws removed and replaced in less than 15 minutes. The video was great because it confirmed what I already assumed.

loosened two 1/4 in. screws removed ice maker unplugged harness. Plugged back in slid the replacement ice maker over the two screws secured. Done

took ice maker out empty ice removed 6 screws removed auger out took off lcck nut pulled off drum replaced with new drum reassembled.

I diagnosed the problem by checking the water flow at the supply valve and hose by disconnecting the hose from the back of the fridge. Found the pressure to be adequate. I then reconnected the supply hose and removed the cardboard backing from the fridge and removed the nuts holding the water inlet valve to the chassis. I loosened the first hose that runs from the bottom of the valve and had my wife activate the valve by pushing the water switch on the front of the fridge. Water basically sputtered out of the valve and I decided that was where the problem was. I ordered the valve from partselect. When it arrived I thought it was the wrong part because it had push-fittings whereas my original valve was all thumb screws. I took a chance and one by one used a utility knife to cut the hose free of the old valve as close to the nut as possible. Connecting them to the new valve was a piece of cake! Just make sure the hose bottoms out when you push it in. I turned the water back on, no leaks! Plugged the fridge in and pushed it back to the wall. After a bit of air bled out I had a strong flow of wateragain like new! The next day the ice cubes were solid again! We use the filtered water so many times a day and had been so frustrated with the slow water flow we had considered donating the fridge and buying a new one; thanks to this easy fix we expect keep it for years to come!

I did it just like the video it was that easy! love this web site amazing!

The repair was extremely simple. First i unplugged the fridge and removed everything from the door. I unscrewed the plastic cap on top of the fridge door hinge to expose the hinge. Then i unbolted the hinge it helps to have someonehold the door so it doesn't fall. After laying the door down I removed the rest of the broken hinge bearing inserted the new one and reinstlled the door making sure it was lined up evenly from top to bottom to the freezer door. The only thing that was annoying was i had to remove the metal plate at the bottom of the door to get to the broke off hinge bearing and those srews were square head screws not phillips head like the one on top of the door.

I thought this was going to be such a chore to find this part, but it wasn't. I went to partselect.com, found the piece I needed, paid for it and was done in 10 minutes. Partselect.com made searching for the piece I needed incredibly easy to find and order. I received the part on time an put the bin in place in five seconds. I will always go back to partselect.com to find my products.

Removed the old container, opened the replacement, put it in and it worked perfectly. Great job! Arrived quickly, well packed and in perfect shape.

I followed a video I found on how to take the front off of the ice dispenser ( to me the hardest part) Once I was in there it was a matter of removing the pin and spring,then putting the new flapper in place of the old. Hardest part in reassembling was getting the spring back where it belongs. After that it was a matter of putting the ice dispenser back together and testing. Works perfectly.