WRS26MR4JS1 Crosley Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Tabs that hang the crisper broke
Ordering replacement parts was easy! Expected a simple pull out old plug, insert new plug.... Not sure if it comes from factory like this or if this had been previously repaired poorly, but the broken plug was heavily glued in place. Took some serious finess work to remove without serious damage. Once out, it was simple plug in
Parts Used:
-
Allen from Eagle, CO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
bottom bin on refrigerator door
-
Harold from Oswego, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Replace Bottom Hinges on refrigerator door
After the original hinge fell apart, I clicked on my bookmarked Part Select www. I simply typed in the model number and followed the instruction straight to a Parts diagram. Both parts I needed were detailed in a scale picture, and were extremely easy to purchase. Partselect is the best appliance part service online, I repair all of my own appliances and save hundreds of dollars on repairs by using the reliable Partselect ordering system. PARTSELECT HAS NEVER LET ME DOWN!!!
Parts Used:
-
Anthony from St George, UT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No Water For Ice Maker Or Drinking
Repair as illustrated was right on. Repair was easy. No problem except still no water for ice or drinking. The valve was not the problem. Filter was replaced prior to valve replacement. Must be a electric switch some where. 3 Yrs ago I have replaced the water activation plastic lever for drinking which was a bit difficult and it turned out ok.
Parts Used:
-
JAMES from ELLIJAY, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Refridgerator side light did not work
Pryed the old loose catch is on the bottom used a common screw driver.pulled the two wires off reversed the procedeure to put the new switch in.took about 5 minutes.
Parts Used:
-
Peggy from Alamogordo, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
no problem
-
JAMES from Somerdale, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Crisper support was missing
Installed new support. I placed the new one in the hole provided and taped in the locking peg with a small hammer. The total installation took about three minutes thanks to the excellent video provided on the web site. Thanks
Parts Used:
-
Harold from Bartlesivlle, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
none
-
Ana from Placentia, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
door closed on open drawer broke lower drawer bin.
Slid new bin into door retainers. The part was ordered in afternoon and the ordered part arrived the next day normal ground delivery.
Parts Used:
-
John from Garland, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Slow Flow of Water
The water flow on or refrigerator was just trickling out. After trying to make sure there was no kink in hose, I called for replacement. Water flows great now... actually better than when new.
Parts Used:
-
Frank from Brant Lake, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Shelf broke
-
Edwin from Copperas Cove, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
back clip of shelf broke allowing shelf to tilt
Removed old shelf. Removed glass from shelf. Installed glass in new shelf. Installed new shelf into frig. Returned drawer to bottom of shelf. Super Easy.
Parts Used:
-
Burke from Norman, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
bottom door bin broke
-
Dawn from Kansas City, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water dispenser broke
This is a very simple and straight forward repair. Remove the outer cover held by 3 screws on the bottom of the dispenser. Then remove 3 screws at the top of the dispensing unit. You are able to lean the dispensing unit far enough out from the top to remove 2 screws that hold the actuator in. Remove and replace the actuator, screws, and dispenser. Easy fix.
Parts Used:
-
JIM from ORLANDO, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
the auger assembly broke (my fault) do I had to replace it!
I was happy you all had the part that I needed and I could easily remove the old one and slide the new one right into place!
Parts Used:
-
Tim from Carthage, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!