WRS26MR4JS1 Crosley Refrigerator - Instructions

Removed old fan motor and installed new one.Not much room for big hands back there.Flexible extensions valuable on this job.

Replaced bins

Pulled out the drawers, lifted out the frame and the glass, dropped the new frame in, put the glass on the new frame, and then the drawers slid right back in on the unbroken tracks. Probably the easiest repair ever. It took longer to clean the refrigerator and the drawers than it took to replace these items.

The 2 door bins came in 3 days! I could not believe how fast the service was. The door bins just slid right into place, not tools required. They look great. Special shout-out to Jennifer T. who helped me over the phone. I placed the order for the bottom door bin and later realized that I could add one more door bin to the refrigerator door to make more storage area. I called the customer service number and she canceled my order. She sent me a follow up email and I was able to place a new order to get both door bins and save on shipping fee. PartSelect was great! Thank you!

parts fit perfectly

I was worried that the support was a permanent fixture in the refrigerator wall. But I pried it out and replaced it with the new part. Holes were exactly the same size so the new part easily replaced the old one.

took off cardboard removed two screws holding fan housing. Removed new fan and housing from box and mounted new fan to new housing (two screws). Installed new fan and housing. reinstalled cardboard and plunged in power cord. Perfect fit.

Purchase was easy. Delivery was quick. Install videos was accurate. Made it eady to as DI project. Safe place for purchase and support. Saved on cost of professional visit.

Since the evaporator was all iced up, I decided to replace the least costliest item (defrost thermostat kit); did not resolve the problem. Once I replaced the freezer temperature control thermostat, the freezer temperature stabilized right at 0 degrees fahrenheit with dial on factory setting. Compressor no longer running constantly.

Initially I changed the filter, but in so doing, I misplaced the o ring located in the filter cup; without that o ring water leaks out every time it cycles. I purchased the o ring online (five dollars plus eight dollars to ship) and bingo no more leaks.

removed backing to refrig unscrewed 2 screws from bracket pulled unit out unhooked hoses and elec plug's / putting in new just reversed the instalation

Remove crisper and shelf. Use a small punch and hammer to gently push the tightening pin through to the wall of refrigerator, keep in mind you'll need to remove this piece with small needle nose pliers before installing new part. Set new part in place and lightly tap the pin in until flush. Install crisper and enjoy the rest of your day.

Remove cover, puch old pin into hole. Remove old support. Set new support in & drive pin in flush. Replace cover.

My part had threaded fittings. The part that I received had snap fittings. Once I realized that that snap fittings worked with the bare tubing and not any special tip endings, I simply cut off the ends of my tubing that mated with the threaded fittings. I then had bare tubing that snapped into the snap fittings. Two minutes later, the part was in place and the job was done. Problem solved.

remove and replace socket. adjust light switch so that it turns light off when door closes.