Models > WRS26MR4JS1 > Instructions

WRS26MR4JS1 Crosley Refrigerator - Instructions

All Instructions for the WRS26MR4JS1
616 - 630 of 881
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
popping sound in door
Took door of and replaced bearing Two screws . HARDEST PART WAS TAKING FOOD OUT OF DOOR.
Parts Used:
Hinge Bearing
  • Douglas from Marlborough, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Clicking sound at hinge bearing whenever door opened
Removed everything from inside door. Loosened top plate screw, lifted off top of refrigerator. Lifted door up and onto the floor on its side. Removed old hinge bearing. Inserted new hinge nearing. Applied grease over hinge bearing surface (very important step). Replaced door, replaced top plate. Replaced all items on door. Clicking sound is completely gone.
Parts Used:
Hinge Bearing Upper Hinge Bearing
  • Richard from Rockford, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
2 Fridge Door Bins Cracked
Took the parts out of the box and snapped them in place, package un wrap time and install time 7 minutes or less. Simple way easy! Aaa plus cust service, thanks ruben~vic & di
Parts Used:
Refrigerator Door Bin
  • Ralph from Kenosha, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
broken bin
snapped in the new bin
Parts Used:
Door Shelf
  • Timothy from West Babylon, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Change water filter
Turned off water to refrigerator and unscrewed canister, removed filter reinstalled canister and ran water thru to get all sludge from line. Turn water back off. Remove canister and install filter reinstalled canister, turned water back on. Run water thru line. Job complete. No problems.
Parts Used:
Water Filter
  • James from Waldo, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Crisper Support Broke Off
I tapped in the peg like it showed in video and pried out with flat screw driver and hammered other peg in flush with part
Parts Used:
Crisper Support - Rear
  • Denise from Claremore, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
not working due to ice on coils
unplugged frig, removed shelves & inner lower back panel in freezer side, removed defrost thermostat from tube, cut the wires and spliced in new stat wires with provided wire splices crimped together and replaced thermostat on tube it has been a week and no ice so far??. this was after 2 trips by the repairman who replace the defrost timer board which was most likely good at a total of $160!!! still cheaper than $1000 for a new frig!!!!!!!!!!!!!!
Parts Used:
Defrost Thermostat Kit
  • terry from litchfield, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken Door Tray
Pooped the old one out and pooped the new one in.Item was in stock, very fast delivery.
Parts Used:
Refrigerator Door Bin
  • Bill from Vancouver, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The ice crusher flap was broken.
Took out the ice box, dumped the ice. Let warm up a bit. Then took out the housing and installed the new one. Works great. Saved a lot of money! Only took a couple days to receive the part. Great service.
Parts Used:
Dispenser Crusher Housing
  • Mary from Allegany, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Bottom bin broken.
Just slipped the bin in place. Very easy. Took less than 2 minutes
Parts Used:
Refrigerator Door Bin
  • Geraldine from San Jose, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
crisper drawer and supports had broke and the tab on the ice actuator had broke
tapped the two support into the side of frigde and placed the crisper drwers on them and was done. next had to take six screws on on front of door where the water and ice come out take broke one out and snap new one in about 15 mins done. everything was simple and easy.
Parts Used:
Crisper Drawer Cover - NO Glass Crisper Support - Rear Ice Actuator Upper Crisper Drawer Cover - Glass NOT Included Water Filter Refrigerator Door Bin
  • keith from cullman, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
One of the mounting tabs broke off
This was the second time the part had failed and it was time to replace it. Rsther than hope a local store may have the part, I went on the internet and found PartSelect.com and ordered what I thought was the right part and it arrived here in Texas the next day! Turned out to be the wrong part. Oops! I contacted PartSelect by email to see if I could return the part and got an imediate response from Denise with the address ad instructions for returning the part and a very generous offer to help select the right psrt. I gave her the refrigerator/freezer model number and she immediately respoded with the part number. I rerordered the part and it again arrived the next day. I slipped it into place on the refrigerator door and it fit!! End of problem but not quite the end of the story. I received an email a couple of days later informing me that the money due me from the first order was on it's way. Color me a very happy customer!!
Parts Used:
Door Shelf
  • Thomas from Willis, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
compressor not running
thanks to all of the people who had the same problems I was able to make a quick fix on my fridge. I pulled the back cover off and found the compressor not kicking on so I replaced the start cap. and im back in bussiness.
Parts Used:
Run Capacitor
  • wilson from indialantic, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
need to replace broken door bin
I removed the broken bin and replaced it with the new one
Parts Used:
Water Filter Refrigerator Door Bin
  • Valerie from Pasadena, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
misplaced
When my wife and kids moved down they lost the upper bracket and the screw for the lower cam. parts show up and matched perfectly to the orginal no issues at all
Parts Used:
SCREW-#10-32 X 3/8 Upper Hinge Bracket
  • michael from covington, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WRS26MR4JS1
616 - 630 of 881