WRS26MF5AQZ Crosley Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
shelf in door broke
-
donald from cuba, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
the compressor capacitor overheated
it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
Parts Used:
-
Bart from goldsboro, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Old parts broke.
Took out two screws, installed new parts, put screws back in. Done.
Parts Used:
-
Roger from Coppell, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door bearing broke in four pieces.Door clunking
Removed the door,pried out broken pieces.Replaced with new bearing{bushing}Lubricated bearing with light grease and replaced door.Took about 15 minutes by myself.
Parts Used:
-
Ernest from Live Oak, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
water valve leaking
Installed new valve.There are several pieces of tubing coming off of the valve. Pay close attention to where they go. Color coordination is poor on the new valve.
Parts Used:
-
Anthony from Indiana, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Crisper Cover support had broken
I watched your video on how to do the procedure and followed it, step-by-step. It worked like a charm. When I took the crisper drawer and runner out of the refrigerator, I noticed that the lower drawer support had broken as well. So, I have ordered 4 to have a few on hand and will repeat the process when my new order arrives. I'm very pleased! Thank you very much.
Parts Used:
-
M Jerdone from Seneca, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Push-down lever on ice actuator broke off
(1) Pull out drip tray. (2) Remove three screws holding in front panel. Pull out panel. (3) Unplug wiring harness and lay front panel aside. (4) Remove three screws holding in a long, narrow circuit board. (5) Unplug wiring harness at left end of board. (6) Pull unit forward so you can see the ice actuator. Loosen (do not remove) screws holding small metal plates where ice actuator pivots. Move left plate (single screw) out of way and remove actuator. (7) Insert new actuator. Be careful that gear on right side meshes with gear on black rubber door that holds ice in. (8) Reverse process to reinstall parts.
Parts Used:
-
Darrell from Helena, MT
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Everything in the refrigerator side was freezing.
The defrost thermostat kit is located in the freezer side of the refrigertor. I turned off the electrical breaker for the refrigerator. I began the project by removing all the frozen food on the lower half of the freezer. I removed the racks and 3 rails on both sides using a cordless drill with a 1/4" socket and located panel. The panel had 4 1/4" screws holding it to the back of the freezer. I removed all screws and the panel came out easy. I located the defrost thermostat and with some wire cutters, I cut the wires. I connected the the new defrost thermostat with wire connectors and reattached it to the copper tube I removed it from. I put the panel back on along with the side rails and racks.. This project was very easy.
Parts Used:
-
Efrain from Union City, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
loud noise fan blade broke,off balance
take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .
Parts Used:
-
EDWIN from ELWOOD, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
We just needed extra door shelf that wasn't included with the refrigerator.
Part Select's website is really user friendly and has all the info you need to determine which item you actually want. I ordered on Friday afternoon and received the part on Saturday without having to pay rush shipping. Wow! Now that's service!
Parts Used:
-
Teresa from Rossville, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
icemaker would not dispence ice
-
Anna from Pittsburgh, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
shelf had broken and one was missing as we just moved into a new home.
Just popped the bin onto the door. Super easy. What's even better is that I ordered it late afternoon and had it the next day. Super fast service! I will do all my business here in the future.
Parts Used:
-
Tiffany from Middletown, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
plastic hinge bearing had broken section
I followed the instructional video and it went well except the piece in the door did not pop out easily and broke into other fragments. I had to use a needle-nose pliers to remove them from the cavity in the door.
Parts Used:
-
James from Festus, MO
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Door wouldn't seal when closed
Removed the door, removed the broken part, inserted new part, used vaseline on all exposed parts and put door back on (better than new)!
Parts Used:
-
Judy from North Port, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
The Bottom Shelf Of The Refrigerator Door Was Broken
-
LESLIE from CORDOVA, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!