Quick Question!

Have you ever purchased from PartSelect.com before?

473177-1-S-Frigidaire-5308000010        -Evaporator Fan Blade
473177-1-S-Frigidaire-5308000010        -Evaporator Fan Blade 473177-2-S-Frigidaire-5308000010        -Evaporator Fan Blade 473177-3-S-Frigidaire-5308000010        -Evaporator Fan Blade http://www.partselect.com/Schematics/Frigidaire/UXRVGK3I.gif

Evaporator Fan Blade

Compare At


You Save


Your Price

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS473177
Manufacturer Part Number 5308000010
Manufactured by Frigidaire

This evaporator fan blade is a genuine OEM part that is sourced directly from the manufacturer. The evaporator fan blade circulates air through the refrigerator to control the amount of cold air goes that goes to internal compartments of the unit. It may need to be replaced if the fridge is noisy or not cold enough. This part is made of plastic and is sold individually. It will be necessary to disconnect power to the refrigerator and empty the freezer compartment of the refrigerator. The tools needed to complete this repair are a 1/4 inch nut driver and a pair of needle nose pliers.

This part works with the following brands: Frigidaire, Kenmore, Gibson, Kelvinator, Electrolux, Crosley, Westinghouse, Tappan, Uni.

This part works with the following products: Refrigerator, Freezer.

This part fixes the following symptoms:

  • Noisy.
  • Fridge too warm.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.0 / 5.0, 3 reviews What's this?
1-3 of 3

131 of 148 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver
Customer: Jordan from Maumee, OH

Noisy fan

1. Removed the 7 nuts using the nut driver from the freezer back panel inside the freezer.
2. Remove the back panel. The evaporator motor and fan are located above the coils.
3. Unplug the wiring harness.
4. Remove the two gold mounting screws holding the motor and fan in place.
5. Remove the motor and fan including the brackets.
6. Install the new motor and fan onto the mounting bracket.
6a. Attach the green ground to the mounting bracket.
7. Screw the two gold screws back into the freezer.
8. Attach the new wiring harness. Note, the old harness had a mounting hole/space for it to connect to the wiring harness of the freezer. The new motor's harness was not long enough for this, so it is connected freely to the freezer harness.
9. Use the hair dryer to melt any ice that may have formed on the coils and hole where the fan goes.
10. Turn the freezer on to see if the fan turns on.
11. Reinstall the back panel.
All done!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

25 of 35 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers
Customer: ROY from PENSACOLA, FL

The evaporator fan burnt up

The fan motor all but caught the inside of the freezer on fire . Had to remove then clean, and I mean clean the walls of the freezer . Then had to pry out the old fan without breaking anything . Replacement of new fan was quick and easy because all the parts that I needed were in the bag

Help other customers find the most helpful instructions.

Were these instructions helpful?   

25 of 51 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: keith from villa rica, GA

Lighting hit the house

first i by passed the timing board, with a ele cord to the fan motor to keep the fridge cool till your parts got here, which was realy fast delivered,
the fan would come on because the board was fried.
it took abot 30 min to install every thind just be carefully unpluging anything.things will break i guess metal eing cold makes the conne4ctors stick together.
evaporator fan is in the frezzer four screws,tested the wires for ohms,and power, when i pluged in the fan i would loss power to the fan,that told me the board was bad, the same night my furnance when to (reaaly) and i lost my borad on the computer ethernet card (lighting isn't fun) it cost to fix everything about 130.00 thanks for thr great parts

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3

Model Cross Reference

This part works with the following models:

PartSelect Number: PS473177
Manufacturer Part Number: 5308000010
Brand Model Number Description