Models > WRS26MF5AQQ > Instructions

WRS26MF5AQQ Crosley Refrigerator - Instructions

All Instructions for the WRS26MF5AQQ
466 - 480 of 803
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
the door bins had cracked and eventually gave way so i needed new ones
just popped on the new ones it was that simple it took like 1 minute
Parts Used:
Refrigerator Door Bin
  • Michael from Anthony, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the refrigerator door was hard to close, and upon inspection I finally decided that the light switch was making the door hard to close.
I removed the door actuated light switch with my index finger and thumb on my right hand. I then removed the two wires from the switch. I noticed that the new switch had different look to it,I think Frigidaire must have had a problem with the original design of the switch. Reassembly was just replacing the two wires and putting the new switch in place, and no more door closing problem.
Parts Used:
Light Switch
  • Paul from Springfield, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drawer support was broke
Pried the broken support insert out with a screw driver and pulled it out with pliers, then inserted the new and pressed it in and Presto the drawer now works good again.
Parts Used:
Crisper Support - Rear
  • Edward from Chandler, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
was not making ice
took the back off refridgerator, disconnected water valve assembly, then disconnected water lines and electrcal connectors. also i received the part in less than 24 hours
Parts Used:
Refrigerator Water Inlet Valve
  • john from glen ellyn, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old plastic shelf broke. Superglue didn't work
I ordered a new shelf and it fit exactly and snapped in to place perfectly.
Parts Used:
Refrigerator Door Bin
  • Kim from Arab, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken refrigerator door shelf bin
The replacement part simply snapped into place
Parts Used:
Refrigerator Door Bin
  • Belinda from Ridgecrest, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken shelf support
Punch out center of old support, then pull it out. Insert new suppport, insert center and tap flat with hammer. All done!
Parts Used:
Crisper Support - Rear
  • Karl from Manchester, NH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It's a mystery but grandson broke the shelf bin
Took the part out of the package and snapped the part onto the refrigerator door.....did not even break a sweat.....
Parts Used:
Refrigerator Door Bin
  • Linda from Bryan, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken door bin
Snapped the new bin into the space on the door
Parts Used:
Refrigerator Door Bin
  • Carrie from mission viejo, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator Bottom Door Shelf Bar
Snaped part in place..so easy. Thanks for your help.
Parts Used:
Refrigerator Door Bin
  • Margaret E from Fort walton Beach, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Crisper cover support was partly sheared
I followed the excellent directions in the video linked to the email from PartSelect. The installation was quick and easy. I rated the whole operation "a bit difficult" because, if I had seen the video before I removed the old part, I would have known that you tap the support's center rod gently INTO the wall instead of wrestling it violently OFF the wall.
Parts Used:
Crisper Support - Rear
  • Neil from Lilburn, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Amazing service
I called and talked to a great customer service rep. and got the part number. I ordered online on a Monday and got the product on Wednesday. Very fast!!!!
Parts Used:
Refrigerator Door Bin
  • Matthew from Dallas, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I forced too large of a container into the refrigerators bottom shelf on the frig door and it snapped.
I checked on line, found the parts house and with the help of the shown diagrams/pics of the parts I was able to order the right part. It arrived the next business day and I just snapped it into place.
Parts Used:
Refrigerator Door Bin
  • Patrick E. from Georgetown, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not dispense ice
I replaced the entire dispenser. I decided it would probably be cheaper in the long run than replacing parts, thus lasting much longer. One thing I would like to comment regarding Part Select is that in all my years of ordering I have never recieved delivery any faster. I ordered one morning and part was delivered the next.
Parts Used:
Ice Container and Auger Assembly
  • Dwain from Stamford, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken tracks
I just watched the online video and then did.
Parts Used:
Meat Drawer Rail - Right Side Meat Pan Rail - Left Side - White
  • sam from Billings, MT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WRS26MF5AQQ
466 - 480 of 803