Models > WRS23W0AWB > Instructions

WRS23W0AWB Westinghouse Refrigerator - Instructions

All Instructions for the WRS23W0AWB
436 - 450 of 574
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
door making noise and not making ice
removed cover from top hinge,then hinge r&r bottom cam plate reinstalled door. now no noise opening door,ice naker is very simple turned water off to frig loosened two screws and unpluged wiring.harness is a little long. took a while to make ice next morning it was working fine
Parts Used:
Icemaker Assembly Door Closing Cam Hinge Bearing
  • tommy from waco, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Fridge was freezing items & freezer was not freezing items
It was simple... After paying $280 for a repair man to come out and install some unnecessary part to the fridge when I told him "everything on the Internet points to a thermostat repair." He disagreed, fixed the fridge and said the freezer would work more efficiently now. It didn't, so I bought a new fridge/freezer, put the old one in the basement. I ordered the thermostat (under $20), put it in, and now (knock on wood), works great and I have a beer fridge for the man cave
Parts Used:
Defrost Thermostat Kit
  • JEFFREY from York, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Food fell out of freezer onto bin and broke it.
Ordered the part online and it came the next day. No problem putting in the new bin; it took less than a minute and no tools required.
Parts Used:
Door Bin
  • Kenneth from Derby, VT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The upper crisper pan cover was broken
Just removed the glass and popped the plastic piece out. The new part fit perfectly. This part came overnight...awesome service, exactly right part, easy to find. Would definitely use them again.
Parts Used:
Upper Crisper Pan Cover
  • sandra from alexandria, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Needed to replaces ice maker.
The replacement was simple, only two screws and the electrical plug. The problem was the location of the two screws that were impossible to see directly and difficult to access with a screw driver.
Parts Used:
Icemaker Assembly
  • Ed from Grants Pass, OR
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Fan Blade had broke off
This repair on this model is super easy because the shroud for the fan is not really attached except for the bottom so I was able to gently bend it to give em enough space to pull the broken fan off and put the new one on.
Parts Used:
Fan Blade
  • Linda from Cocoa, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The freezer portion of the refrigerator worked but the fresh food refrigerator did not
I watched the step-by-step installation video and followed the instructions therein.
Parts Used:
Evaporator Fan Motor Kit - 120V 60Hz
  • KIMBERLY from BROOKLYN, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
The partition between the doors of the refridgerator was hot and the fan that cools the condensor and the coils was not working.
I replaced the condenser fan motor, but first I bought a brush to clean the coils. I first unplugged the fridge and took off the back panel. I located the fan motor and noticed how dusty it was back there. All the dust dirt and pet hair can accumulate making the motor work harder and overheat. I cleaned the coils with the coil brush and a shop vac. Once I cleaned it, I started to take off the three screws that held the fan motor suspended,its important that you move the fridge enough so you have adequate room to work. I unplugged the motor and finished removing the screws. When I removed the motor I was upset when I compared it to the motor I was sent because it looked physically different. The motor I removed had a plug that was integrated in the motor, but the one I received had a plug that pigtailed outside the motor. I called PartSelect and told them they sent me the wrong motor. The lady that I spoke with was very friendly and helpful, and after looking up my part # she assured me that it was the right part. Next I had to remove the fan from my old motor, the nut that held the fan on looked like a clip, but it screwed off using open pliers.I removed the fan and put it on the other motor, using the parts supplied. Before I installed the motor I screwed the three screws in and out of the three screws holes to make the screws go in easier during instalation. I installed the fan motor using the three screws supplied, and once it was secure I spun the fan with my finger, making sure the fan spun freely and installed the plug to the fan. I then plugged in the fridge to make sure the fan was working,and replaced the back panel. Hope this helps you out, good luck.
Parts Used:
Refrigerator Condenser Fan Motor Kit Crisper Support - Rear Hinge Bearing
  • Jim from Simi Valley, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
broken
quick to repair great instuctions
Parts Used:
Ice Actuator
  • Roy from Rogersville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door making noise and not closing automatically
Followed video instruction provided on this site.
Parts Used:
Hinge Bearing
  • Rick from Cerritos, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Side Mounted Ice Maker Quit Functioning,
1st my 72 year old husband has not had great success in repairing anything: electrical or plumbing. We got the part the next day. Had ordered it late one afternoon and had it the next morning in Wyoming. From the time we took it out of the box, disconnected the old one, plugged in the new one, remounted, it took less than 15 minutes. Amazing and it works great. Didn't need extra electrical connector, but tricky part on electrical connectors is to squeeze side to take apart and put back together. He used mirror to see the screws to loosen to take out and put back in ice maker. Next day our tray was full of ice. Good service/Good Product.
Parts Used:
Replacement Ice Maker
  • Sandra from Casper, WY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
When you opened the refrigerator door, it made a big thump....
Easily found the parts we needed from the diagrams, Hinge bearing and door closing cam, watched the video, which was very helpful, ordered the parts from the parts list numbers...Our order came in just a few days and my husband put the parts on in about 20mins. Couldn't have done it without the help we found on your page...Thank you so much....Will be back if we have any other trouble.... Bill and Ellen Lopitz.....
Parts Used:
Door Closing Cam Hinge Bearing
  • Ellen from Springfield, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Needed parts for our refrigerator
A friend of our family gave us a nice refrigerator; 2 doors, has ice maker. some parts were missing but through the Parts Select I've been able to purchase online any part needed. Very easy to install and I didn't have any problems with the parts delivered. Fast service and I always get the right part without any delays of returning them. I strongly recommend Parts Select for any person who need to purchase refrigerators parts online.
Parts Used:
Door Shelf Bin
  • Miguel from Los Angeles, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Replacing Shelf/Pan Glass
Pan cover/Shelf glass gotten broken while out cleaning. Takes less than a minute to remove glass and re-insert (unless you break glass insert)
Parts Used:
Pan Cover Insert
  • James from Vernon, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken crisper cover support
Received the parts promptly and did the repair just as the video showed. All went well and had the repair completed in 10 minutes. For me that was remarkable because I have two left hands! Would highly recommend partselect.com
Parts Used:
Crisper Cover Support - Front
  • Thomas from Las Vegas, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WRS23W0AWB
436 - 450 of 574