WRS23W0AW6 Westinghouse Refrigerator - Instructions

I followed the instructional video and it went well except the piece in the door did not pop out easily and broke into other fragments. I had to use a needle-nose pliers to remove them from the cavity in the door.

Removed the door, removed the broken part, inserted new part, used vaseline on all exposed parts and put door back on (better than new)!

Replacing the tray was easy once I received the correct tray. It seems the part number on the tray had been changed over the years since I had purchased the refrigerator. By ordering the part from just the catalog, I had no idea I was ordering the wrong part. When I received the part, I called and the representative who I spoke with told me of the problem and with the serial number the correct part was ordered...good Customer Service.

It was a piece of cake took mins Thanks ps for those who are not mechanical they even have videos to show you how to make the repair

I watched the do it yourself video which helped tremendously. My husband was busy so I was able to do it myself.

removed the front cover and then the motherboard underneath, removed the old tounge and placed the new one in, very easy and straight forward

Well to be honest with you, I followed the directions that someone else had posted. And it was somewhat easy. The only thing that I was having problems with was dropping the screws while trying to put them back. So I used a magnet, several times. My 9 year old grandson helped me. It really didnt take that long to replace. Good Luck

Easily done. Great fit.

Not long after we bought this fridge, the plastic on the light switch cracked, making the lever stick out too much so that the door wouldn't close. It's been taped down ever since. I simply pulled the old switch out and plugged the new one in. I'm kicking myself that I didn't do this ages ago. It was so easy and now I can see inside my refrigerator again.

Took front off and found the broken spring, got new one and replaced, now works great. Make sure to unplug as the water can come on and flood the freezer.

I followed the video instructions from your site and it couldn't have been easier.

After receiving the parts, I clamped on the connector ends, and put on the shrink tubes. Unplug frig, took out the shelves (4) screws, unscrewed back panel (4) screws. Took old thermostat off tube, clipped (2)wires on old thermostat, splice wires, clamped connector on old wires, moved up shrink tubes, and used a heat gun to shrink the wires. Put new thermostat on the tube the old one came off of, put panel, and the shelves back. Pugged frig in. Works great!

The two screws that held the ice maker in place could not be seen do to there location. I could only get one hand inside do to space restriction.So I placed a mirror inside so I could see the screw heads and from point it was very easy to see and line up the nut driver on the screw heads. I then lifted it up and unplugged the wiring and installed the new ice maker. Works like a charm. Paul

1st a changed the defrost stat. Waist of time. Realized there was no evaporator above fan. Noticed ice was builing up behind ice maker near fill tube. Found if I shut off ice maker ice wasnt building up on fan. Moved fridge out unplugged fridge unscrewed plastic nut. Turned 90 degrees. Replaced tube locked in place . Screwed nut back on . Plugged in and turned ice maker on. Wife happy ice was back on and no noise.

followed the video instructions and wa-la! Saved my money by not calling the repair man, the shipment of my part was fast, and the repair was even faster. Thank you for helping me in my repairs. Very Satisfied!!! Carol