WRS23MW3AWC Westinghouse Refrigerator - Instructions

Slipped off the top and bottom screw cover plates unscrewed the 4 retaining Phillips screws, removed the old handle and replaced it by reverse the procedure. The best part of the process was the amazing quick delivery and efficiency of Parts Select.

1. Turned off water and unplugged refridgerator. 2. Removed the drip tray. 3. Removed the 3 screws under drip tray. 4. Pulled facing off the fridge. 5. removed the 3 screws at top of dispenser. 6. Pulled the dispenser out far enough to remove broken actuator. 7. Removed 2 screws holding broken actuator in place. 8. Removed broken actuator and replaced with new actuator. Re-attached everything in reverse. Be aware that there are two serial numbers on the labels inside the refridgerator. The one with the letters at the end tells the color of the refridgerator. I had to return and reorder. The company emailed me the instructions and that went well too.

take front panal off and unplug the electrectal tail to the front panal then unscrew the 4 hold down screws then take out broken part and then replace with new part and re-assemble front panal

Took less than 10 min to install following the inclosed instructions. At first it was not making enough ice to make me happy so I set the temp. a little colder in freezer. Now making ice like crazy. Works better than the old one ever did. Very happy with the new replacement.

My Frigidaire Drawer broke... I ordered the parts and installed it within 5 min. It took more time to remove the food and drawer then it did to install the pegs.

Took out the support and put back in the new one.

First I remove the water catch tray. Then I removed the three screws the hold the face plate on. ( You do have to slide face plate upward) I let that hang gently. Then I removed the three screws that hold the mother board in place, tilt the motherboard out to be able to see the back of the actuator. Remove three screws and flanges that hold actuator in place. Look at how spring is held in place before removing. Remove actuator, replace with new actuator set spring, replace screws and flanges, push motherboard back in place,replace the three screws,replace face plate with the three screws and replace catch tray. And your done!!!!

Fridge came ice maker assy configured with an ice cream shelf to maximize space. I found this annoying becuase it blocked access to the ice maker controls and ice bin, which is useful for bulk access even thought there's a door front dispenser for ice. I recognized parts diagrams for a similar model and corrctly assumed they'd fit. So for $30 and an easy change I have the feature I wanted. Pretty cool.

it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks

No installation really required. This was the greatest experience I have ever had purchasing any product. I broke the shelf cleaning the refrigerator, ordered the part on-line and received it in less then 24 hours of breaking the original. Am slightly disappointed that the shelf was plain and not like the original with the white dots, but definitely very pleased with the timely replacement service!

The hardest part was removing items from inside door!

I followed the video that came with my email receipt but i had to use the extra electrical adapter, there is no where to put the extra wiring so it is hanging next to the wall. I was glad I didn't have to unplug the fridge. just kept the wire up so no water would come out. It took several hours to start working and it doesn't make as much ice as the old one, but at least it works. It was a very informative video. Thanks

Unplugged frig. removed old switch with the aid of screw driver. removed wires and taped; plugged frig. back in and waited for new one. new one came, unplugged frig.removed tape from wire clips plugged in to switch and pushed switch into socket hole and plugged frig. back in; shut door, works like a new one.

When my side by side Kenmore refrigerator quit keeping the top half of my freezer and refrigerator cold I called Sears to see how much it would cost to get it checked out and fixed. Bottom line it was going to cost minimum $65 (which was just for him to come out) to $250 on up depending on what the problem was. So i decided to "do it myself"! I took it apart and within a few minutes figured out that it was my evaporator fan. So I went to sears to order the part based on the part number and with shipping and handling it was going to cost $125. While at sears I got on one of their computers and quickly looked up Kenmore parts and partselect.com came up and I quickly found the part for $62 and I chose overnight delivery and spent a total of like $83. When my part arrived I realized that the wiring/plug ins didn't quite match up. So I got online and went to their website and found a video for "do it yourself'ers" like me on how to splice the wiring to make it match. It took me about 20 min to splice the wire and put my refrigerator back together and IT WORKED! Easy easy easy and I saved moocho bucks! Ill never pay a repairman again. Oh and by the way, I am blond! :-)

Simply,we slid the 2 new shelves on to the refrigerator shelve protrusion holds and made sure the the back catch was securing the shelves. Great customer service. We had the first order wrong and sent it back. The second order we used the model number and it was perfect. The real deal was the security we felt giving out a bank card number. Thanks to ruben!!! He was great as was the second rep you have helping us~~~~~`respectfully,r & d vickers