Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS2368270
The screws and trims are NOT included with this handle.
This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.
This part fixes the following symptoms:
Partselect made it easy and affordable to replace the part myself. It arrived on the 3rd day after ordering. Thanks
Help other customers find the most helpful instructions.
Were these instructions helpful?
I removed the screws holding the old handle parts in place, and slid the two trim strips out. I attached the new handle and then attached the new trim strip and the old one that was still OK.
removed 4 screws-replaced handle-very easy-worked great
It was almost too easy. All I had to do was screw 4 screws into the handle, put the caps on to hide the screws and I was done. And I saved money by ordering from Frigidaire vs my local appliance store where I actually purchased the freezer.
Removed old handle by unscrewing 4 self tap screws and upper and lower trim pieces were snapped off. Fixed in place new handle with the same 4 screws ensuring it was right way up; there is a top and botttom. New top and bottom trim pieces snapped in easily.
I removed the top and bottom plastic bits that hide the screws. Then I removed the screws and put the new handle on with the same sheet-metal screws. No problems encountered.
removed two pieces of trim.....removed four screws of old handle.....replaced with new handle....replaced screws.....replaced trim pieces
Very simple - removed the plates that cover the end of the handel, then removed the screws and the broken handle. There were four screws - did a top one, then a bottom one, then the other top and bottom one. Made sure they were on tight and put the covers back on. Really proud of myself!
Slipped off the top and bottom screw cover plates unscrewed the 4 retaining Phillips screws, removed the old handle and replaced it by reverse the procedure. The best part of the process was the amazing quick delivery and efficiency of Parts Select.
The handle and trim piece were very easy to change. Four phillip head screws and it was done. The only difficult part was getting the broken crisper support out of the the wall of the refrigertor. Once it was removed the new one just snaped into place it was easy to replace.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.