WRS23MF5AST Crosley Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door didn't close completely without extra push
Easy easy easy! I usually call for service that costs $75 just for a repairman to come to the house...I found this website, typed in the model number of the fridge and voila...found the part. Received the part in one day! Repair took abut ten minutes from start to finish. The broken part was up inside the door, not the hinge on the box part of fridge. At first glance I thought I had the wrong part. Must look at door and pry out broken bearing with screw driver. Just slide in new bearing. I am usually not one to repair things myself so I was quite proud after fixing this one....I would recommend this company to all of my friends!!!
Parts Used:
-
David from Georgetown, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
0 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My Frigidaire Drawer Broke
My Frigidaire Drawer broke... I ordered the parts and installed it within 5 min. It took more time to remove the food and drawer then it did to install the pegs.
Parts Used:
-
David from Coppell, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
5 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker doesn't work
-
Carol from Salem, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
not making ice
turned off water supply, removed cardboard back, removed supply line, unhooked all color coded connections,took out bad water valve and replaced with new one note: the new valve came with pex connections so i carefully cut off flared tubing ends with sharp razor knife making sure when i pushed tubing into new valve that i did so with some force until i HEARD and felt them snap in place very simple plus i received the new valve in 2 days very happy with PartsSelect.com you CAN do it
Parts Used:
-
mark from east greenwich, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic shelf support broke
Took out the support and put back in the new one.
Parts Used:
-
Derek from Graham, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
0 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leaking from broken intake water line
Turned off water supply disconnected hose from valve removed cardboard backing removed the screws holding valve ass'y disconnected the three wire connections disconnected five hoses then cut and installed in new valve per instructions provided reconnected three wires reinstalled valve ass'y turned water supply back on and checked for leaks by engageing filtered drinking water in the refrigerator door replaced backing to complete job.
Parts Used:
-
Jamie from Weeki Wachee, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Socket set, Wrench (Adjustable)
0 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wanted to change features
Fridge came ice maker assy configured with an ice cream shelf to maximize space. I found this annoying becuase it blocked access to the ice maker controls and ice bin, which is useful for bulk access even thought there's a door front dispenser for ice. I recognized parts diagrams for a similar model and corrctly assumed they'd fit. So for $30 and an easy change I have the feature I wanted. Pretty cool.
Parts Used:
-
W from Lafayette Hill, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Husband pushed water to hard and though it was the ice maker
-
Thelma from Hickory, NC
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
4 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water spraying from behind refrigerator
remove back cardboard panel, cut off water supply, remove screws holding valve to back of refrigerator, unscrew water lines & reattach to same fittings on new valve, screw new valve in place, replace cardboard cover.
Parts Used:
-
mike from tampa, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
1 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the compressor capacitor overheated
it was great. I ordered the capacitor for my frigidaire frig and it arrived
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
in 3 days. plugged in the part to the compressor and my frig has been
working ever since. I spent 3 minutes ordering the part and 30 seconds
attaching it to the frig. Easy, very easy. saved myself a 75 dollar repair
visit. thanks
Parts Used:
-
Bart from goldsboro, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken supports on the front of crisper.
We watched the video you had available. WOW! We had been frightened away by a repair man. Anyway, we pried the broken supports off, and then pounded the posts into the wall where they dropped down out of sight. We placed the new supports in and put the drawers back in. Viola! Done! Took less than 10 minutes! Thank you!
Parts Used:
-
Cherrie from Flint, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
face plate broken nd ribbon disconnected
Installed the ribbon on the face plate first and then to the main part of the door. This prevented the wires within the ribbon not to be broken. then put the cover on and screwed it in.
Parts Used:
-
Patricia M from Lakewood, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker quit working.
The two screws that held the ice maker in place could not be seen do to there location. I could only get one hand inside do to space restriction.So I placed a mirror inside so I could see the screw heads and from point it was very easy to see and line up the nut driver on the screw heads. I then lifted it up and unplugged the wiring and installed the new ice maker. Works like a charm. Paul
Parts Used:
-
Paul from Akron, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
leaking water onto the evap fan freezing causing alot of noise
1st a changed the defrost stat. Waist of time. Realized there was no evaporator above fan. Noticed ice was builing up behind ice maker near fill tube. Found if I shut off ice maker ice wasnt building up on fan. Moved fridge out unplugged fridge unscrewed plastic nut. Turned 90 degrees. Replaced tube locked in place . Screwed nut back on . Plugged in and turned ice maker on. Wife happy ice was back on and no noise.
Parts Used:
-
Steve from Salem, NH
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Door closing cam broke
followed the video instructions and wa-la! Saved my money by not calling the repair man, the shipment of my part was fast, and the repair was even faster. Thank you for helping me in my repairs. Very Satisfied!!! Carol
Parts Used:
-
Carol from LENA, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!