WRS23MF5ASF Westinghouse Refrigerator - Instructions

The repair was easy,after I ordered the wrong part twice,called customer service,Patrica helped me determined the correct part,explained how to returned wrong parts,refunded my money. I recieved the right part, installed it, drawer works fine,thank you for the wonderful service, if I ever need appliance parts again,I'll call partselect first. THANKS DAVE

I removed the drip pan in the ice/water well. Then I removed the 3 screws holding the front control plate and disconected the front control from the ice/water dispenser.

I then removed the ice/water dispenser by removing 3 screws, disconecting the wire block and removing the water hose.

The actuatior was easily replaced (4 screws) and I reversed the whole process to put everything back together.

One other note, the actuatior had been redesigned and the replacement seems to be much stronger than the original... shouldn't have to do this again.

First I removed the Item out of the trays located on the door Then I removed the two screws that held the door in place> Lift the door of its location lay it on a flat surface. Counter top on a drop cloth. Remove old broken bearing< install new bearing. Replace door, install screws. Like new. I am a female and I was very proud of myself.

I used a flat head screwdriver to pry open the front of the socket as I pushed the socket toward the freezer side. I unplugged the two wires connected to the socket then re-connected the two wires to the new socket and popped the new socket back in. I then put a new light bulb in and we had light again in the fridge.

was very easy. just ordered a new ice maker which was delivered in a few days. The installation was so simple. Just plugged the new ice maker in and hung the unit on the 2 screws. And then tightened the screws with a 1/4 in nut driver.

This would have been an easy repair, but I bought the Frig from Lowes and I think they added the icemaker. The replacement icemaker uint has a plug on it for easy replacement. My frig was hard wired so I had to cut off the plug and splice the wires. Not a real big deal but a small work space.

All I did was follow the instructions Jonathan from Texas posted and it was very easy. Thanks to him!!!

removed the old parts with a philips screwdriver then repalced those parts with the new parts and knocked the keeper inwith the small hammer

It was just a matter of taking out 1 screw that held the old support, replacing the drawer support with the new piece and replacing the screw that held it on.

Removed the one screw holding the rail, positioned the new rail and put the screw back in.

This was the best company I ever dealt with - the part arrived in less than 24 hours. Incredibly fast,
and the order was right the first time.

took existing water valve loose, removed plastic water lines and reinstalled on new valve and installed new valve into refrigerator

took out bottom plate where the glass sets removed 3 screws at bottom lifted up on face plate and pulled out the cover (unplug controls) 3 more screws and operating unit was out. Important....unplug electrical connection on the left side 2 screws to remove actuator and replaced with new one.
Reverse steps.

This is an easy repair. Unplug appliance. Remove the old water valve by unscrewing it from the frame of the refrigerator. Disconnect the cables and all the water hoses. The hose fittings are a different type: clip off the old connectors from the hose ends and push the hoses straight into the new connectors till they fit solidly. Reconnect the cables and screw the valve back onto the frame of the refrigerator.
Unfortunately, my leak was from a hose, not the valve, so this didn't actually fix it.

Opened the box. Took off the end caps and popped it right into place. Easy as pie!

Dropped it in!! A two minute fix. No problem.