WRS23MF5ASA Westinghouse Refrigerator - Instructions

1-Remove upper plate with phillips screw driver (6) screws 2- remove upper hinge plate with ratchet and socket (2) bolts 3- lift door off bottom cam, lay door flat on floor. 4- Remove broken cam on lower part of door, just pull out. 5- Install new cam in bottom of door 6- raise door up, set on cam, reinstall top bolts and screws 7- p. S. Make sure you trace top hinge location with a pencil before removal, so installation has proper location.

Very easy repair, instruction were clear and easy to follow

I took out the drawer, then the whole shelf. I unscrewed the track that was broken and screwed in the new one. I then, put the shelf back in the fridge and put in the new drawer. All works awesome!!!
Thanks PartSelect for getting me the parts I needed so fast!

Simple, I had a repair man come over and diagnose the problem. After confirming, I ordered the part and replaced it. Need to make sure you get the ice build up out of the fitting tnat goes from the back of the fridge connection at the top and the filler tube inside the unit, mine was iced over. Repair man wanted to charge me $250.00... with his service call and buying the part, it cost $120

all above

Removed the old, installed the new one and finally figure out we had to press the reset button.

I just simply inserted the bin

According to the online video instructions.

it was a simple fix, all i had to do was remove 3 small bolts from top of door, set door aside remove 1 screw that holds door cam in place, install new door cam.hole job took about 15 minute's.

I basically took the two shelves and in stalled them.

I needed one with the adapter. I installed it and there was ice in the tray the next morning...no problem

Drove pins all the way thru supports & then pryed support off. Tapped new supports in place. Watch the vidio on installing new supports. I probably wouldn't have been able to get the supports off without the trick I learned to just knock them on thru. Took all of 5 minutes to replace 4 supports.

Replacement took about 10 seconds, just put it onto the holding brackets, pressed down and presto...DONE!

Due to the nature of the support deisign and installation which was unusual I watched the video on how to extract the old broken support and install the new one, odering the new part was simple as the view privided in the parts section was specific and and easy choice to make, cost was very minimal and I received it the next day due to my being in close proximity to the shipping point, thank you and my crisper is very happy and so am I.

The part was simple find on the website. Ordered part. But the wrong part was sent. I called them and they promptly refunded my money. Reordered the right part. And once received it took only 5 mins. Thanks to video on website. They saved me approx. 100.00. I tell all my friends about the website. The best site bar none. Now if they could do this for cars!!! I give partselect.com 5 stars.