WRS23MF5AS9 Westinghouse Refrigerator - Instructions

removal of the old valve to identify the problem took the most time. Once the new valve came it it was easy. NOTE: the old one had threaded connectors, and the new one is press/fit so the ends of the tubing need to be cut. The color coding and size matching are great.

Just replaced the shelf bins and it was very easy and quick. The delivery was quick as well.Thanks

I replaced the entire dispenser. I decided it would probably be cheaper in the long run than replacing parts, thus lasting much longer. One thing I would like to comment regarding Part Select is that in all my years of ordering I have never recieved delivery any faster. I ordered one morning and part was delivered the next.

I just watched the online video and then did.

took door off ,replaced the hinge,and put door back on....

After taking door off, I found the door closure/hinge bearing was broke. I got manual out, looked up part number, googled it, and ordered the part from this website. Couldn't be happier!! My wife is really happy too, such an easy fix

1) Viewed the video 2) Got a screw driver 3) Removed the shelf/bracket assembly 4) Removed the old support 5) Reassembled and put back in place. It took longer to clean the dirty shelf than to fix the support. Very easy.

Slid the new door shelf boon into place and closed the door.

Followed the video instructions and it works like a charm! To top it off, the part got to my house the day after I ordered it! Fantastic service!

I followed the excellent directions in the video linked to the email from PartSelect. The installation was quick and easy. I rated the whole operation "a bit difficult" because, if I had seen the video before I removed the old part, I would have known that you tap the support's center rod gently INTO the wall instead of wrestling it violently OFF the wall.

I watched the "how-to" videos on your website, and followed the instructions. It was very easy, took about 10 minutes, and now the door works like new.

The video that parts select provided was a big help. The repair was simple. I spent most of the repair time digging out the old broken bushing from the hole in the bottom of the door. Needle nose helped withthis task.

Took the door off,as per instructions,pulled the worn bottom bearing out, pushed new in and replaced door. The job was very simple and took about ten minutes. Also I received the part in two days after ording

The old pins have to be completely dislodged (preferably with an awl) before placing the new crisper support. The new pin of the support should be driven easily into the hole on the refrigerator´s wall with a conventional hammer (carpenter type). If you find resistance while hammering on the pin, do not continue. This probably means that the old pin is still inside the hole and does not allow the new pin to go in.

Due to the nature of the support deisign and installation which was unusual I watched the video on how to extract the old broken support and install the new one, odering the new part was simple as the view privided in the parts section was specific and and easy choice to make, cost was very minimal and I received it the next day due to my being in close proximity to the shipping point, thank you and my crisper is very happy and so am I.