WEF365BHWB Westinghouse Range - Instructions

disconnect the power from the stove pulled the racks out and took a nutdriver loosened up the screws for the element and disconnected the wires from it and replaced with new element real easy

Snapped in the new replacement part and intalled stove drawer in less then two minutes.

I searched the internet for help, that lead me to your site. I typed in the make and model. Within seconds some drawings appeared, showing the part I needed. I watched your video on making the repair. You make it so easy. I ordered the parts you recommended. They arrived in just a couple of days. I went back to your site to take another look at your video and I was ready. In just minutes, I had the drawer out, installed the new guides. The one side, the guide was completely gone, so I could snap in the new2 guide as you recommended. The other side, the guide was broken off and I had to use a needle nose pliers to get it out. Then snaped in the new guide. Re-installed the drawer with all the goodies, wax paper, tin-foil, baggies etc. Closaed t6he drawer and everything lined up perfectly. Thanks to you I've got a drawer that works again aqnd I got it done before my husband got home from work. Funny thing, he hasn't complained or asked me about the drawer. I guess that will be our little secret....Thanks Julie

I disconnected the power cord,took the top back plate off,the switch knob on the switch I was to change,the two screws holding it.pull the old switch out,place the new one in the holder,replaced the two screws that holds the switch and took the wires off the old switch one at a time and placed them on the new one in order on new switch.replaced the back cover and plugged power cord back in.turned range on,it was good. r taite,

unscrewed two screws, exposed wire connections. Disconnected two wires, then placed new element in oven and reconnected two wires, then pushed connectors back inside stove body. A acordless screwdriver made quick work of the two screws and the element works fine. Thank you for your quick delivery.

Removed the drawer, simply snapped the rear drawer glide in the punch-out by hand, replaced the drawer. Works well

Watched the online video and followed the instructions. I unplugged the oven, used the nut driver to loosen the screws, removed the old element, hooked up the new element and voila... back in business. I received the part the next day after ordering it!

The repair was as simple as reattaching the broken glider. No tools were needed.

I watched you vedio and done just as the vedio told me how to change the switch. When I got the switch on pluged it in turned it on and every thing work great. thank you very much.

Turned off electric to range, removed old element, replaced it with the new one, then turned electric back on. Super easy.

First the item we ordered arrived in 1 day, we were totally amazed!! My husband switch out the heating element and it worked!!!! Thank you for great service!!!!

Ordered part which arrived in 2 days, yeah!! Installation was really simple, took less than a minute. The online instructions/ video were very helpful! Excellent site to order parts!

I had the old one out and new installed in less than 15 minutes and I would like to thank you for the promptness of your delivery

We turned off the power then unscrewed the element . After removing the element from the connectors we taped the wires to the oven so as not to lose them back into the holes. We attached the new element, pushed the ends into the holes and refastened the nuts. Very easy and now we are back in business.

I watched the short video on the site that showed how to replace the glides. It was key since it showed how to use a screwdriver to remover the old slide. The new ones then popped right in place.