Quick Question!

Have you ever purchased from PartSelect.com before?

434226-1-S-Frigidaire-3051162           -Front Drawer Glide
434226-1-S-Frigidaire-3051162           -Front Drawer Glide 434226-2-S-Frigidaire-3051162           -Front Drawer Glide http://www.partselect.com/Schematics/Frigidaire/XND4QNRC.gif

Front Drawer Glide

PartSelect Number PS434226

Sold individually.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Door won’t close.

Compare At

$3.49

You Save

$.58

Your Price

$2.91
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Rear Drawer Glide

Part Number 434227

Sold individually.

$3.50
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 49 reviews What's this?
1-15 of 49
 

526 of 540 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: bryan from sparta, WI

Drawer glides were broke on front and back

used a screwdriver pushed the old ones out put the new in. the video instructions were great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

367 of 372 people found this instruction helpful

Parts Used:
  • Front Drawer Glide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Joseph D. from Stuart, FL

Broken slide

Pulled broken one out, slid in the new. Most unbeliveable service I have ever received. Tremndous job, you should sell it to others, Many thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

344 of 349 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers
Customer: Steven from Taylors, SC

Rental property stove only had 2 working burners and bottom drawer off track

first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink wrap on wires and used the wire nuts to connect wires together then heated the shrink wrap. I then put screws back in terminal block brackets. I then put the burners on while looking under lid so i would know they were making good connections as this is a bad design from factory. if you pull out burners to clean them and they are not put back in right you dont have a good connection and that causes the terminal blocks to get hot and melt. thats what happened in my case.
As far as the drawer glides they just snap into place

Help other customers find the most helpful instructions.

Were these instructions helpful?   

140 of 263 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Michael from Middleton, NH

Bottom drawer broken

Frst I slid the drawer out.I then pryed the broken drawer glides off with a flat blade screwdriver. The new drawer glides then just snap into place,then reinstall the drawer and check for smooth operation.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

67 of 69 people found this instruction helpful

Parts Used:
  • Front Drawer Glide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: EDWARD from ONSTED, MI

Plastic clips were cracked.

It was so easy my wife did it bu snapping in the new clips.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

94 of 156 people found this instruction helpful

Parts Used:
  • Front Drawer Glide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Tracy from Poulan, GA

Broke drawer glide

This was very simple I just snap the part on no tools required. it took less than 2 seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

67 of 128 people found this instruction helpful

Parts Used:
  • Front Drawer Glide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Homer from Thomaston, GA

Drawer glide on bottom stove drawer broke

Snapped the new part into the slot the old one had been in.The repair including opening and closing the drawer took less than a minute.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Rosemarie from Anchorage, AK

Trim handles broken during moving

Used a paint spatula to pop upwards the old bottom half of the door handle trim, has metal inserts inbetween pieces.
Snapped new ones on.
Was initially intimidated, but only took 5 minutes to replace both.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Michael from Signal Hill, CA

Broken door glide

snapped the new piece of plastic in its place and ta da, its fixed.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Patty from Carlisle, KY

The draw glide was broken and the clock had stopped working.

With the draw glide, I simply had to slide it into position. To replace the clock, I had to remove the back panel and then replace the broken clock with the new one by simply turning a few screws and using a pair pliers to removing the color coded wires.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: alfredo from miami lakes, FL

Glide replasement for frige and range oven

snap out the damage one replace whith the new one

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Front Drawer Glide
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Marvin from MONTANA CITY, MT

Guide was broken

Used a slot screwdriver to pry the old guide...clipped the new guide into its place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: James from WEST BEND, WI

Glides broke on lower storage drawer

The front glides easily snap into a hole on the sides of the range. The rear glides easily snap onto the sides of the lower rear of the drawer.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Gerald from CANON CITY, CO

The lower heating element burnt through and front drawer glides broke.

Repair is simple and straight forward. Simply open oven door and remove oven racks. A philips #2 screwdriver is needed to remove 2 screws, 1 on each side at lower portion back of of oven..Slowly pull heating element out towards front of oven, wires will pull out with it. Simply wiggle and unplug spade connectors on each side, plug new ends of heating element into wires. Slide heating element back in re-attach removed screws not over tightening just till snug.

Front drawer glides: Remove oven drawer and this is a good time to give it a good solid cleaning. Clorox wipes and elbow grease. The handle can be removed to clean under neath as well just a few screws to remove with the same philips screw driver.

The front drawer glides do not mount on the drawer, they mount on each lower side of drawer opening above lower glides. There is a squared off small opening on each side for the glides to pop into with small square notches at the bottom of each hole.

Take the curved part of the glide and angle the insertion going into the hole turning down and pushing in, the glide will "Pop" or "Click" when seated.

That's it. Save time and money and fix it your self. You don't need to buy a new range when parts and do it your self are less than $30.00.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Front Drawer Glide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Don from WEST UNION, OH

One guide was missing and the other was broken

Read the instructions provided and simply installed the guides. Total time was less than 5 min.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 49