All Installation Instructions for Hotpoint Refrigerator TCT16AMDRWH

would not "dump" ice cubes

I am more than 80 yrs, always thought I could fix just about everything--but, this looked complicated. Once I received the new icemaker; took a good look where the screw-holes, etc. were, then removed the "old" one. Took about 20 or 30 minutes, then the "new" one was easily installed.

Parts Used:

Ice Maker

Phayo from Lake Charles, LA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

bad fan motor

take fan out,put new in

Parts Used:

EVAPORATOR FAN MOTOR KIT

Evaporator Fan Blade Kit

theodore from salisbury, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Icemaker Froze Up/ Stopped Making Ice.

Your online instructions were easy to understand and follow. I replaced the outlet valve which took about 20 min. Then I had to dissasemble and remove icemaker to de-ice inlet tube and back wall of frezzer to defrost cooling fins. All to gether it took me about 1hr / 40 min. Frezzer now works just like new. Thanks for making it affordable and easy. Curt

Parts Used:

Single Outlet Valve Kit

CURTIS from OCALA, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

Broken shelf above crisper drawers

Super easy, remove drawers, remove broken shelf, slide new shelf into slots and return crisper drawers to their new support system. Very speedy receipt of appliance part and it took about 5 minutes to make change. Thanks much.

Parts Used:

Crisper Drawer Cover

Judith M from Tucson, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

no ice

Followed the video, very simple

Parts Used:

Ice Maker

Richard from Las Cruces, NM
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Frezzer would freeze up, refrigerator stayed cold, solved the problem. Now the refrigerator seems to be running more than usual.

Checked the defroster coil which is located behind the rear panel in the freezer compartment, it was still working. Followed the schematics down to the defrost timer, which is located in the lower front of the refrigerator and tried that. Plugged in the new part and the problem is solved.

Parts Used: