PHS68EJSB0 Frigidaire Refrigerator - Instructions

Ordered the replacement part,slide the new shelf over the hooks done in no time.

Removed the upper shelf and removed the old broken right and left support sides and replaced with the new ones, screwed in beneath the shelf. Replaced the upper shelf that holds the meat drawer and slid in the new drawer. Wonderful to have a functioning part in the refrigerator that still works great.

The repair was easy,after I ordered the wrong part twice,called customer service,Patrica helped me determined the correct part,explained how to returned wrong parts,refunded my money. I recieved the right part, installed it, drawer works fine,thank you for the wonderful service, if I ever need appliance parts again,I'll call partselect first. THANKS DAVE

It is very easy..........push button on the exissting filter. It removes easly, then insert new one. Remember to run the water for 3 minutes before next use. It took about 5 minutes.

It just slips right in, no tools required.
But I just wanted to say that it took less than 24 hours
from the time I ordered my part (3pm Tuesday) until I received my part (1pm Wednesday. I couldn't believe it came so fast. I am very happy with PartSelect.com and will definately use this site again whenever I need any appliance
parts. Thank you.

I took out the shelves that the supports were on and replaced the parts very easily. study it a moment before taking off the old and then snap on the new.

Emptying the shelves took longer that unscrewing old part and replacing with new part. Works perfect!

Replaced water filler. Easy

Took out the old cover and installed the new one. Put glass back in and - done!

I removed the ice bucket from the freezer, took the front off with a screw driver, and then put the front on the new bucket and replaced it in the freezer. It was very easy.

First I removed the Item out of the trays located on the door Then I removed the two screws that held the door in place> Lift the door of its location lay it on a flat surface. Counter top on a drop cloth. Remove old broken bearing< install new bearing. Replace door, install screws. Like new. I am a female and I was very proud of myself.

just replaced the old broken one and put the drawer back .

Pulled door seal put and pushed in new seal, icing formed on fridge side lower return vents, had to fully chip away, compressor running and stopping as normal.

I used a flat head screwdriver to pry open the front of the socket as I pushed the socket toward the freezer side. I unplugged the two wires connected to the socket then re-connected the two wires to the new socket and popped the new socket back in. I then put a new light bulb in and we had light again in the fridge.

was very easy. just ordered a new ice maker which was delivered in a few days. The installation was so simple. Just plugged the new ice maker in and hung the unit on the 2 screws. And then tightened the screws with a 1/4 in nut driver.