MFI2568AES Maytag Refrigerator - Instructions

I simply snapped it into place, removing the protective covering during the process. Although the cost of the part was higher than expected for a simple piece of clear molded plastic, the whole job took about two minutes total. And, moreover, the part arrived two days earlier than I anticipated.

removed the old filter. unwrapped the new one. peeled off the protective foil. inserted new filter as directed. placed old filter in sink to drain. ran "water" from dispenser to purge air from line. Shazam!

It took one minute to put the shelf in. The best part was the speed with which the part arrived. I also want to compliment the operator I dealt with. She was very helpful.

Removed crisper drawers and the crisper frame. Then removed the glass shelf from the frame and also the plastic front piece and the metal rod that adds stability to the frame. Those last two items required a screw driver and pliers. Inserted the metal bar into the new frame, popped on the front piece, and installed frame in frig. Put in center rail, then glass top, and then put in crisper drawers.

The repair was straight-forward once the pantry drawer and lower shelves were emptied and removed - remove the mounting screws, replace the broken end cap with the new part. It took me several minutes to reattach everything. It took me longer to clean up all the old food spills under the pantry drawer.

20 seconds. Easy Easy.

Removed the old bar. Replaced the part that moved the shutter open and closed. Installed the new parts. Put the drawer lid back in place. Working fine. Thanks!!

I used the feedback information from others who commented on your website

Opened up the compartment where the old filter was located, twisted it to take it out (be careful not to spill water in the filter!), and installed the new one. Even a 64 year old woman had no trouble!

replaced electric control board, defrost for six hours. next day (24 hours) same problem, dusterhoff2928@charter.net

Similar to other reports. Only thing I can add is the nut driver is 1/4" and it is all I needed to remove and replace all five screws.

Replaced the center rail

After years of using a flash light to check the contents of my refrigerator, I decided to try to fix the problem myself. Replacing the light switch was very easy. The directions were straight forward and I'm sorry I waited so long to tackle the problem.

This is the second order we have placed from Partselect. It arrived within two days as promised. The repair took about ten minutes and consisted of removing the deli drawer, removing the broken end cap, removing the slide rail from the end cap, cleaning out the area with a sponge, attaching the slide rail to the new end cap and installing the new end cap. The deli drawer easily slides onto the rails and the deli door easilt locks into place within the side rails. We were unable to locate the part locally and from now on, Partselect will be the first place we look for an appliance replacement part.

Took out 2nd new filter $43.00 each that clogged in less than 2 weeks each and installed in 2 mins. this bypass and ice and waterr work perfect.Thank you, thank you for your exceptional service ordered part and it came next day without extra charge,great service.